xue-shop Set For Racing GM Delphi LS7 Lifters LS/LQ 4.8/5.3/5.7/6.
xue-shop Set For Racing GM Delphi LS7 Lifters LS/LQ 4.8/5.3/5.7/6.
xue-shop Set For Racing GM Delphi LS7 Lifters LS/LQ 4.8/5.3/5.7/6.
From the manufacturer
17122490 LS7 Lifters Set of 16 GM Original Equipment Engine Hydraulic Valve Regulator Fit LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0 5233745 5234670 JB2079 HL123 JB2270 HL112
- Function: Hydraulic adjustment replaces the adjustment screw and lock nut. The hydraulic tappet is always in contact with the camshaft, runs without clearance, maintains a reasonable valve volume, and reduces the impact and noise between parts
- Fits:LS1, LS2, LS3, LS6, LS7 Engines,V8 Engine Sizes 4.8L, 5.0L,5.3L, 5.7L, 6.0L,V6 Engine Sizes 3.3L,3.8,4.3L
- Applicable to: April 2007 Express 3500, 1999-2006 2013 Silver 1500, 2007 Silver 1500 Classic, 2000 Silverado 2500, 2003-2005 Silver 2500 HD, 2000-2006 2008 Tahoe, 2002-2006 Avalanche 1500 ,1988-1990 1994 1998-2005LeSabre, 1998-2004 Park Avenue, 1993 Riviera, 2000-2004 2006 GMC Yukon XL 1500, 2003 2007 GMC Savannah 1500, 2003 2004 2007 GMC Savannah 2500, 2004 2007 GMC Savannah 3500, 1999- 2006 GMC Sierra 1500, 2007 GMC Sierra 1500 Classic
- OE:17122490, 17089852, 17108057, 17120070, 17121905,HL124, 10530-16, 91113, HT-2148, 12595365, 5234890, 5235498, 5233745, 5234670,JB2079, HL123,JB2270,HL112 ,HL118,HL119, L2148
- Choose the thickness of the tappet: measure the measured value of the gap, the reasonable gap of the valve is 0.20MM and the exhaust pipe gap is 0.30MM, and then the thickness of the exhaust tappet can be calculated
Mechanical elevator and hydraulic elevator are compared
- 1 It's quieter.
- 2 low maintenance.
- 3 can adjust the thermal expansion of the engine.
- 4 as a built-in shock absorber can reduce pressure
- On the valve train.
- 5 be able to design a "bleeding rate"
- In order to adapt to different engine speed range.
Why choose hydraulic lift
Maintenance and low cost are the first consideration.
Mechanical cam design requires running clearance or
Valve clearance, while hydraulic tappet is the opposite.
When the rocker arm assembly is properly tightened
When positioning, the push rod must occupy all the clearance
Falling into the hydraulic lifter, resulting in the push rod
In most cases, the seat can be moved down 0.020 inch to 0.060 inch
Adjust the preload
LS series as V8 engine
When closing the clearance between piston and valve, the preload should be
Step by step, 1 / 4 turn at a time, allowing the lift
Bleed between adjustments. This can be avoided
The valve may be bent.
The hydraulic tappet elevator must be checked frequently
Many things will affect the lift, after the cam, hydraulic tappet and push rod are in place, install
For your rocker arm assembly, tighten all valve train bolts
In the right order. Choose a cylinder you want to go to
Check it out. Turn the engine in the normal direction by hand
Rotate until both valves are closed. you are here
Compression cycle of the cylinder. (in this position, the valve
The spring is at least the minimum pressure they have to do the job
It's a little easier.) Wait a few minutes for the lift Bleeding
Why the correct viscosity and proper glue breaking
Important matters of hydraulic roller cam running-in:
1 Many noisy lift complaints
Actually, the wrong viscosity was used. Thicker, taller
Viscosity oil (such as 20W-50) will not have enough oil to flow into the tappet
Too little viscosity, such as 5W-30, will make the elevator
It is easy to "bleed". But there is a common misunderstanding
The results show that high-performance engines require 20W-50, and the results show 10W-40
Provide the correct viscosity for the hydraulic tappet.
2 The best protection for hydraulic roller lifts is to use a complete formula
Run-in oil. Another reason is that the elevators are noisy and poor
Appears as debris caught by the elevator. The number of door breaks has increased tenfold
Particles will be generated during the running-in process, most of which will disappear
Via the lift. Proper oil running-in will not severely wear parts, resulting in
Excess crumbs. Change the oil and filter after running-in
Get wear particles out of the engine within 500 miles
They can cause lasting damage.
3 These same recommendations apply to ramjet engines
Steel swing arm. High friction at the pivot point
A lot of heat, so proper lubrication is essential for their running-in.
| Brand: | xue-shop |
|---|---|
| Isin: | INP60VHAPWWP |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
From the manufacturer
17122490 LS7 Lifters Set of 16 GM Original Equipment Engine Hydraulic Valve Regulator Fit LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0 5233745 5234670 JB2079 HL123 JB2270 HL112
- Function: Hydraulic adjustment replaces the adjustment screw and lock nut. The hydraulic tappet is always in contact with the camshaft, runs without clearance, maintains a reasonable valve volume, and reduces the impact and noise between parts
- Fits:LS1, LS2, LS3, LS6, LS7 Engines,V8 Engine Sizes 4.8L, 5.0L,5.3L, 5.7L, 6.0L,V6 Engine Sizes 3.3L,3.8,4.3L
- Applicable to: April 2007 Express 3500, 1999-2006 2013 Silver 1500, 2007 Silver 1500 Classic, 2000 Silverado 2500, 2003-2005 Silver 2500 HD, 2000-2006 2008 Tahoe, 2002-2006 Avalanche 1500 ,1988-1990 1994 1998-2005LeSabre, 1998-2004 Park Avenue, 1993 Riviera, 2000-2004 2006 GMC Yukon XL 1500, 2003 2007 GMC Savannah 1500, 2003 2004 2007 GMC Savannah 2500, 2004 2007 GMC Savannah 3500, 1999- 2006 GMC Sierra 1500, 2007 GMC Sierra 1500 Classic
- OE:17122490, 17089852, 17108057, 17120070, 17121905,HL124, 10530-16, 91113, HT-2148, 12595365, 5234890, 5235498, 5233745, 5234670,JB2079, HL123,JB2270,HL112 ,HL118,HL119, L2148
- Choose the thickness of the tappet: measure the measured value of the gap, the reasonable gap of the valve is 0.20MM and the exhaust pipe gap is 0.30MM, and then the thickness of the exhaust tappet can be calculated
Mechanical elevator and hydraulic elevator are compared
- 1 It's quieter.
- 2 low maintenance.
- 3 can adjust the thermal expansion of the engine.
- 4 as a built-in shock absorber can reduce pressure
- On the valve train.
- 5 be able to design a "bleeding rate"
- In order to adapt to different engine speed range.
Why choose hydraulic lift
Maintenance and low cost are the first consideration.
Mechanical cam design requires running clearance or
Valve clearance, while hydraulic tappet is the opposite.
When the rocker arm assembly is properly tightened
When positioning, the push rod must occupy all the clearance
Falling into the hydraulic lifter, resulting in the push rod
In most cases, the seat can be moved down 0.020 inch to 0.060 inch
Adjust the preload
LS series as V8 engine
When closing the clearance between piston and valve, the preload should be
Step by step, 1 / 4 turn at a time, allowing the lift
Bleed between adjustments. This can be avoided
The valve may be bent.
The hydraulic tappet elevator must be checked frequently
Many things will affect the lift, after the cam, hydraulic tappet and push rod are in place, install
For your rocker arm assembly, tighten all valve train bolts
In the right order. Choose a cylinder you want to go to
Check it out. Turn the engine in the normal direction by hand
Rotate until both valves are closed. you are here
Compression cycle of the cylinder. (in this position, the valve
The spring is at least the minimum pressure they have to do the job
It's a little easier.) Wait a few minutes for the lift Bleeding
Why the correct viscosity and proper glue breaking
Important matters of hydraulic roller cam running-in:
1 Many noisy lift complaints
Actually, the wrong viscosity was used. Thicker, taller
Viscosity oil (such as 20W-50) will not have enough oil to flow into the tappet
Too little viscosity, such as 5W-30, will make the elevator
It is easy to "bleed". But there is a common misunderstanding
The results show that high-performance engines require 20W-50, and the results show 10W-40
Provide the correct viscosity for the hydraulic tappet.
2 The best protection for hydraulic roller lifts is to use a complete formula
Run-in oil. Another reason is that the elevators are noisy and poor
Appears as debris caught by the elevator. The number of door breaks has increased tenfold
Particles will be generated during the running-in process, most of which will disappear
Via the lift. Proper oil running-in will not severely wear parts, resulting in
Excess crumbs. Change the oil and filter after running-in
Get wear particles out of the engine within 500 miles
They can cause lasting damage.
3 These same recommendations apply to ramjet engines
Steel swing arm. High friction at the pivot point
A lot of heat, so proper lubrication is essential for their running-in.
- Brand: xue-shop
- Manufacturer Part Number: 12499225
- Fitment Type: Direct Replacement
- Manufacturer Warranty: 1 Year
- Interchange Part Number: HL124, 12595365
- Other Part Number: 850-16 10530-16 91113 HT-2148 HL124
- Country/Region of Manufacture: China
- Placement on Vehicle: Front
- MPN: HL124
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.