Skip to main content

US ENERGY PRODUCTS 48"x100" Automotive Sound Deadening Insulation Heat Barrier Noise Proof Deadener

Item Description:

This is 48inch x 100inch 1/4 solid closed cell foam core reflective insulation

Our leading Competitor sells the same product for twice as much (type car insulation this is the same product without the fancy listing and advertising.)

Our material comes from the same manufacturer and is Made in the USA

Supershield Reflective Foam Core Insulation Is part of the Supershield NasaTek Family of products and is the ideal Insulation for Hot Rods, Street Rods, Race Cars, Vintage Autos, Trucks, Vans, Motor Homes, Boats, and More. For use in Automotive Firewalls, Car Doors, Headliners, Hoods and Speaker Boxes. This foil and waterproof foam (not Bubble packaging Material) product helps by reducing road and vibration noise, Lowering heat in cab or hood and providing water protective membrane everywhere it is adhered to. Supershield Reflective Foam Core Insulation is indoor air quality approved and mold and mildew resistant. Pliable and moldable for easy application. Spray adhesive at limited areas holds everything in place as Supershield Reflecitve Foam Core is extremely lightweight. Used in IROC Series as well as newly constructed Ambulance, Firetruck and Military vehicles Supershield Reflective Foam Core provides heat and sound reduction for comfort.

Supershield Car Insulation is the professionals choice for Heat and Sound Automotive Insulation

>>>Puncture, Crush and Water Resistant

>>>Lightweight, Flexible, Easy to cut and Handle

>>>Long Lasting, Non Toxic

>>>Stops Heat, Deadens Sound, Won't Absorb Moisture

>>>Class 1 Class A Fire Rating, ASTM Certified

>>>1/4 Nominal thickness

>>>Solid Foam Core Insulation between 2 layers of Metailized barrier



Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
UPC
Does not apply
Brand
Modigt
Color
Silver
Material
Double Layer Aluminum, Foam
Products Condition
100% Brand New
Notice
Self prepared glue or double-sided tape is required
Manufacturer Part Number
Car Heat Shield Sound Insulaiton Deadener Floor Mat
Interchange Part Number
Car Heat Shield Sound Deadener Floor Deadening Mats
Type
Car Jeep Truck Noise Reduce Dampening Floor Mat
Fitment Type
Direct Replacement
Placement on Vehicle
Cargo/Trunk/Bonnet/Dashboard/Under Seat/Doors
Application 1
Turbo, Front Fender, Rear Fender
Application 2
Hood, Firewall, Doors, Floor, Roof
Application 3
Trunk Lid, Trunk Room, Engines, Tailgate
Application 4
Ceiling, Underneath Bonnets, Underfelt
Application 5
Underlay, Boot, Panel, Chasis, SUV, Caravan
Application 6
Automotive, Motorhome, Camper, Restorer, Rat Rods
Application 7
Classic Car, Race Car, Stock Car, Old Vintage Car, Pickup
Application 8
Van,Truck, limousine, Camper,Boat, Motor Homes, School Bus
Application 9
Muscle Car, Hot Rods, Corvettes, Imports, Tuners, Street Rods
Application 10
For Use In The Application of Any Sound Deadening
Application 11
Cockpit Floor, Tailgate, Firewall U Type Wall, Low Rider
Function 1
Protects Paint from Blistering
Function 2
Reduce the road/engine/wind noise
Function 3
Dustproof, Waterproof, Anti-moisture
Features
Noise Reduction, Easy to Cut
Features2
Easy Installation, Waterproofing, Fireproofing
Features3
Protects Paint from Blistering, Anti-moisture
Manufacturer Warranty
2 Years
Performance Part
Yes
Universal Fitment
Yes
Size
80Inch X 40Inch ( 2sqm / 21.52sqft )
Thickness
5mm = 197mil = 3/16”
Item Weight
200g (0.44 lbs)
Surface Finish
Car Heat Shield Sound deadener Floor Mats
Suitable For
Applicable to All Vehicles on The Market, Including Jeeps
Adhesive Backing
No
Brand: US ENERGY PRODUCTS
Isin: INES1E8ISUIP

$58.33

  • Free shipping in US
  • Arrives:

  • Free 30-Day returns

In Stock

Sold by , Fulfilled by IBSPOT
Ships from USA

IBspot Buyer Protection

Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

GUARANTEED SAFE CHECKOUT

More seller options

Starting from

Compare all sellers
  • MONEY BACK GUARANTEE

    30 days money back guarantee, no additional fee charged.

  • EXCELLENT SUPPORT

    We provide 24/7 online customer support via email.

  • Fast Shipping

    One week domestic shipping. Global delivery to the US in 2 weeks.

scroll to top arrow
US ENERGY PRODUCTS 48"x100" Automotive Sound Deadening Insulation Heat Barrier Noise Proof Deadener

US ENERGY PRODUCTS 48"x100" Automotive Sound Deadening Insulation Heat Barrie...

$58.33

Item Description:

This is 48inch x 100inch 1/4 solid closed cell foam core reflective insulation

Our leading Competitor sells the same product for twice as much (type car insulation this is the same product without the fancy listing and advertising.)

Our material comes from the same manufacturer and is Made in the USA

Supershield Reflective Foam Core Insulation Is part of the Supershield NasaTek Family of products and is the ideal Insulation for Hot Rods, Street Rods, Race Cars, Vintage Autos, Trucks, Vans, Motor Homes, Boats, and More. For use in Automotive Firewalls, Car Doors, Headliners, Hoods and Speaker Boxes. This foil and waterproof foam (not Bubble packaging Material) product helps by reducing road and vibration noise, Lowering heat in cab or hood and providing water protective membrane everywhere it is adhered to. Supershield Reflective Foam Core Insulation is indoor air quality approved and mold and mildew resistant. Pliable and moldable for easy application. Spray adhesive at limited areas holds everything in place as Supershield Reflecitve Foam Core is extremely lightweight. Used in IROC Series as well as newly constructed Ambulance, Firetruck and Military vehicles Supershield Reflective Foam Core provides heat and sound reduction for comfort.

Supershield Car Insulation is the professionals choice for Heat and Sound Automotive Insulation

>>>Puncture, Crush and Water Resistant

>>>Lightweight, Flexible, Easy to cut and Handle

>>>Long Lasting, Non Toxic

>>>Stops Heat, Deadens Sound, Won't Absorb Moisture

>>>Class 1 Class A Fire Rating, ASTM Certified

>>>1/4 Nominal thickness

>>>Solid Foam Core Insulation between 2 layers of Metailized barrier



Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
UPC
Does not apply
Brand
Modigt
Color
Silver
Material
Double Layer Aluminum, Foam
Products Condition
100% Brand New
Notice
Self prepared glue or double-sided tape is required
Manufacturer Part Number
Car Heat Shield Sound Insulaiton Deadener Floor Mat
Interchange Part Number
Car Heat Shield Sound Deadener Floor Deadening Mats
Type
Car Jeep Truck Noise Reduce Dampening Floor Mat
Fitment Type
Direct Replacement
Placement on Vehicle
Cargo/Trunk/Bonnet/Dashboard/Under Seat/Doors
Application 1
Turbo, Front Fender, Rear Fender
Application 2
Hood, Firewall, Doors, Floor, Roof
Application 3
Trunk Lid, Trunk Room, Engines, Tailgate
Application 4
Ceiling, Underneath Bonnets, Underfelt
Application 5
Underlay, Boot, Panel, Chasis, SUV, Caravan
Application 6
Automotive, Motorhome, Camper, Restorer, Rat Rods
Application 7
Classic Car, Race Car, Stock Car, Old Vintage Car, Pickup
Application 8
Van,Truck, limousine, Camper,Boat, Motor Homes, School Bus
Application 9
Muscle Car, Hot Rods, Corvettes, Imports, Tuners, Street Rods
Application 10
For Use In The Application of Any Sound Deadening
Application 11
Cockpit Floor, Tailgate, Firewall U Type Wall, Low Rider
Function 1
Protects Paint from Blistering
Function 2
Reduce the road/engine/wind noise
Function 3
Dustproof, Waterproof, Anti-moisture
Features
Noise Reduction, Easy to Cut
Features2
Easy Installation, Waterproofing, Fireproofing
Features3
Protects Paint from Blistering, Anti-moisture
Manufacturer Warranty
2 Years
Performance Part
Yes
Universal Fitment
Yes
Size
80Inch X 40Inch ( 2sqm / 21.52sqft )
Thickness
5mm = 197mil = 3/16”
Item Weight
200g (0.44 lbs)
Surface Finish
Car Heat Shield Sound deadener Floor Mats
Suitable For
Applicable to All Vehicles on The Market, Including Jeeps
Adhesive Backing
No

Condition

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...

Application 10

For Use In The Application of Any Sound Deadening

Size

see title

UPC

Does not apply

Adhesive Backing

No

Placement on Vehicle

Cargo/Trunk/Bonnet/Dashboard/Under Seat/Doors

Suitable For

Applicable to All Vehicles on The Market, Including Jeeps

Application 7

Classic Car, Race Car, Stock Car, Old Vintage Car, Pickup

Application 6

Automotive, Motorhome, Camper, Restorer, Rat Rods

Application 5

Underlay, Boot, Panel, Chasis, SUV, Caravan

Application 4

Ceiling, Underneath Bonnets, Underfelt

Notice

Self prepared glue or double-sided tape is required

Application 3

Trunk Lid, Trunk Room, Engines, Tailgate

Features2

Easy Installation, Waterproofing, Fireproofing

Application 2

Hood, Firewall, Doors, Floor, Roof

Application 1

Turbo, Front Fender, Rear Fender

Manufacturer Warranty

10 Years

Features3

Protects Paint from Blistering, Anti-moisture

Function 3

Dustproof, Waterproof, Anti-moisture

Function 2

Reduce the road/engine/wind noise

Function 1

Protects Paint from Blistering

Features

Noise Reduction, Easy to Cut

Application 11

Cockpit Floor, Tailgate, Firewall U Type Wall, Low Rider

Application 9

Muscle Car, Hot Rods, Corvettes, Imports, Tuners, Street Rods

Application 8

Van,Truck, limousine, Camper,Boat, Motor Homes, School Bus

Performance Part

Yes

Products Condition

100% Brand New

Color

Silver

Fitment Type

Direct Replacement

Manufacturer Part Number

Car Heat Shield Sound Insulaiton Deadener Floor Mat

Material

Double Layer Aluminum, Foam

Brand

US ENERGY PRODUCTS

Thickness

5mm = 197mil = 3/16”

Type

Car Jeep Truck Noise Reduce Dampening Floor Mat

Interchange Part Number

Car Heat Shield Sound Deadener Floor Deadening Mats

Surface Finish

Car Heat Shield Sound deadener Floor Mats

Universal Fitment

Yes

Item Weight

200g (0.44 lbs)

 

Processing Time

  • We process and ship orders Monday through Friday, excluding holidays.
  • Most orders are processed within 1–3 business days, depending on product availability.
  • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

Shipping Coverage

We currently ship to addresses within the United States only.

Products may ship from:

  • Our U.S. warehouses, or
  • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

Each product page clearly displays the “Ships From” location before checkout.


Shipping Methods & Estimated Delivery

 

Shipping Method Estimated Delivery Cost
Free Shipping (US) 5–10 business days Free, available on eligible items
Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $2.00 each additional
Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
Extended Delivery (Ships from Overseas Warehouse) 10–15 business days $14.50 for the first item, $2.00 each additional

Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

Free Shipping

We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


Carriers

We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


Import Duties & Taxes

All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


Tracking & Notifications

Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

You can track your shipment anytime using the Track Your Order page on our website.


Order Changes & Cancellations

If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

Contact: support@ibspot.com


Item Not Received

If your tracking number shows “Delivered” but you haven’t received your package:

  1. Check with your local USPS or UPS office.
  2. Confirm that the shipping address provided was correct.
  3. If the issue remains unresolved, contact support@ibspot.com for assistance.

Damaged or Lost Parcels

If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


Customer Support

For any questions about shipping, tracking, or delivery, our customer support team is here to help.

Email: support@ibspot.com

We’re always happy to help.

Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


Order Cancellation Policy

Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

How to Request a Cancellation

You can contact us through:

Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


Return Policy

We accept returns for most items within 30 days of delivery for a full refund.

To be eligible for a return:

  • The item must be unused, in the same condition as received, and in its original packaging.
  • A tracking number must be provided to confirm the return shipment.

Non-Returnable Items

Certain products cannot be returned, including:

  • Perishable goods (for example, food, flowers, newspapers, magazines)
  • Intimate or sanitary goods
  • Hazardous materials or flammable liquids/gases
  • Gift cards
  • Downloadable software
  • Some health and personal care items

Partial Refunds (If Applicable)

Partial refunds may be granted in specific situations, such as:

  • Books with obvious signs of use
  • Opened CDs, DVDs, software, or vinyl records
  • Items not in their original condition, damaged, or missing parts not due to our error
  • Items returned more than 30 days after delivery

How to Return an Item

To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.


Shipping Cost for Returns

Please contact us before returning any item.
We will provide a free return shipping label.

If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.


Refund Processing

Once your return is received and inspected:

  • In-store returns are refunded to the original form of payment or issued as a gift card.
  • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

Please allow:

  • 5–7 business days for the return to reach our Returns Center.
  • An additional 3–10 business days for your bank to post the refund to your account.

Damages, Issues & Claims

Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.

Product Claims

Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


Exchanges

We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


Return Address

IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States


Customer Support

Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

Email: support@ibspot.com
Contact Form: Contact Us page

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Subscribe To Our Newsletter

Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.