|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vehicle Fitment Information:
1995-2002 Volkswagen Cabrio 2.0L L4 1984cc 121 CID Convertible FWD
1992-1992 Volkswagen Corrado 2.8L V6 2792cc Coupe FWD
1990-1992 Volkswagen Golf 1.6L L4 1588cc 97 CID Hatchback FWD
1990-1992 Volkswagen Golf 1.8L L4 1780cc Hatchback FWD
1996-1997 Volkswagen Golf 1.8L L4 1780cc 109 CID Hatchback FWD
1993-1993 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD
1995-1999 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD
1993-1995 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD
1998-1998 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD
1993-1999 Volkswagen Golf 1.9L L4 1896cc 116 CID Hatchback FWD
1994-1995 Volkswagen Golf 2.0L L4 1984cc Hatchback FWD
1993-1999 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD
1990-1992 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD
1995-1999 Volkswagen Golf 2.8L V6 2792cc Hatchback FWD
1990-1992 Volkswagen Jetta 1.6L L4 1588cc 97 CID Sedan FWD
1990-1992 Volkswagen Jetta 1.8L L4 1780cc Sedan FWD
1995-1998 Volkswagen Jetta 1.8L L4 1781cc 109 CID Sedan FWD
1993-1995 Volkswagen Jetta 1.8L L4 1788cc 109 CID Sedan FWD
1993-1998 Volkswagen Jetta 1.9L L4 1896cc 116 CID Sedan FWD
1990-1992 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD
1996-1996 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD
1990-1998 Volkswagen Jetta 2.0L L4 1984cc 121 CID Sedan FWD
1994-1998 Volkswagen Jetta 2.8L V6 2792cc Sedan FWD
Notes:
(1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle.
(2)100% BRAND NEW and tested to meet or exceed OEM specifications.
(3)High corrosion resistance and long service life.
(4)Bare shocks & struts set only, springs and mounts are not included.
(5)Professional Installation is Highly Recommended.
Shock absorber strut
Function:
It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car.
The following problems occur in the vehicle and the strut needs to be replaced:
(1)The car makes abnormal noises (tapping, rattling)
(2)Oil leakage.
(3)Frequent and irregular tire wear.
(4)Poor stability will make you feel very uncomfortable.
(5)The brake takes more time/distance to stop.
(6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts:
1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut.
2. Use a jack to lift the vehicle and place the chassis in a safe position.
3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system.
4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire.
5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle.
6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts.
7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut.
8. Remove the struts rod nut, upper bracket and upper insulator.
9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut.
10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time.
11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer.
12. "Road test" your vehicle immediately to ensure proper installation.
When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
| Item Specifics | |
|---|---|
| Brand | OnCarmotor |
| Items Included | Mounting Hardware |
| Type | Strut Assembly |
| Features | 100% Accuracy of Fit |
| Shock Absorber Type | Gas |
| Shock Absorber System | Double Pipe |
| Manufacturer Warranty | 1 Year |
| Material | Steel |
| Performance Part | No |
| Universal Fitment | No |
| Mounting Style | Screw-On |
| Superseded Part Number | Shock Absorber and Strut Assembly |
| Quantity | 4pcs |
| Manufacturer Part Number | 11420654 |
| Adjustable | No |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Front |
| OE/OEM Part Number | 71933 ,71265 |
| Interchange Part Number | 235614 ,343191 |
30-day free return provided.
Shop Category Picture Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Rear Left Right Struts Shocks For Volkswagen Jetta Corrado Cabrio Golf
Vehicle Fitment Information: 1995-2002 Volkswagen Cabrio 2.0L L4 1984cc 121 CID Convertible FWD 1992-1992 Volkswagen Corrado 2.8L V6 2792cc Coupe FWD 1990-1992 Volkswagen Golf 1.6L L4 1588cc 97 CID Hatchback FWD 1990-1992 Volkswagen Golf 1.8L L4 1780cc Hatchback FWD 1996-1997 Volkswagen Golf 1.8L L4 1780cc 109 CID Hatchback FWD 1993-1993 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD 1995-1999 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD 1993-1995 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD 1998-1998 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD 1993-1999 Volkswagen Golf 1.9L L4 1896cc 116 CID Hatchback FWD 1994-1995 Volkswagen Golf 2.0L L4 1984cc Hatchback FWD 1993-1999 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD 1990-1992 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD 1995-1999 Volkswagen Golf 2.8L V6 2792cc Hatchback FWD 1990-1992 Volkswagen Jetta 1.6L L4 1588cc 97 CID Sedan FWD 1990-1992 Volkswagen Jetta 1.8L L4 1780cc Sedan FWD 1995-1998 Volkswagen Jetta 1.8L L4 1781cc 109 CID Sedan FWD 1993-1995 Volkswagen Jetta 1.8L L4 1788cc 109 CID Sedan FWD 1993-1998 Volkswagen Jetta 1.9L L4 1896cc 116 CID Sedan FWD 1990-1992 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD 1996-1996 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD 1990-1998 Volkswagen Jetta 2.0L L4 1984cc 121 CID Sedan FWD 1994-1998 Volkswagen Jetta 2.8L V6 2792cc Sedan FWD
Notes: (1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle. (2)100% BRAND NEW and tested to meet or exceed OEM specifications. (3)High corrosion resistance and long service life. (4)Bare shocks & struts set only, springs and mounts are not included. (5)Professional Installation is Highly Recommended.
Shock absorber strut Function: It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car. The following problems occur in the vehicle and the strut needs to be replaced: (1)The car makes abnormal noises (tapping, rattling) (2)Oil leakage. (3)Frequent and irregular tire wear. (4)Poor stability will make you feel very uncomfortable. (5)The brake takes more time/distance to stop. (6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts: 1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut. 2. Use a jack to lift the vehicle and place the chassis in a safe position. 3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system. 4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire. 5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle. 6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts. 7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut. 8. Remove the struts rod nut, upper bracket and upper insulator. 9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut. 10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time. 11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer. 12. "Road test" your vehicle immediately to ensure proper installation. When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
About Us:
We are a professional auto-parts shop, we are committed to making the best auto-parts products and providing you with better services and cost-effective prices.
If you have any questions, please contact us. Please trust us, we will reply to your questions in a short time, and provide solutions as soon as possible.
Payment:
1.Instant Paypal payment is the preferred method of payment.
2.Other payments accepted by ebay also can be accepted.
3.If you want to change the shipping address, please contact us by eBay messages (We can change the address according to the new address you provide after we check it.)
Shipping:
2-8 working days in transit.
1.Product will be shipped within 1-2 business days after full payment is received and verified.
2.All orders will be shipped from our US warehouses.
3.Packages will shipped out by the carriers below: USPS、FedEx、UPS、DHL and other carriers.
4.If you need an accurate logistics tracking number, contact us and we will provide it as soon as possible.
Returns:
30-day free return provided. 1.Return shipping is to be paid by the Buyer.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3.Please contact us via eBay email before returning the goods,We will provide a solution as soon as possible.
Contact Us:
Special Note: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Satisfaction of customers is just our untiring pursuit!
Any quesiton or problem, do contact us please. We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brand: | OnCarmotor |
|---|---|
| Isin: | IDLSNX1W9ZOF |
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
30 days money back guarantee, no additional fee charged.
We provide 24/7 online customer support via email.
One week domestic shipping. Global delivery to the US in 2 weeks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vehicle Fitment Information:
1995-2002 Volkswagen Cabrio 2.0L L4 1984cc 121 CID Convertible FWD
1992-1992 Volkswagen Corrado 2.8L V6 2792cc Coupe FWD
1990-1992 Volkswagen Golf 1.6L L4 1588cc 97 CID Hatchback FWD
1990-1992 Volkswagen Golf 1.8L L4 1780cc Hatchback FWD
1996-1997 Volkswagen Golf 1.8L L4 1780cc 109 CID Hatchback FWD
1993-1993 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD
1995-1999 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD
1993-1995 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD
1998-1998 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD
1993-1999 Volkswagen Golf 1.9L L4 1896cc 116 CID Hatchback FWD
1994-1995 Volkswagen Golf 2.0L L4 1984cc Hatchback FWD
1993-1999 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD
1990-1992 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD
1995-1999 Volkswagen Golf 2.8L V6 2792cc Hatchback FWD
1990-1992 Volkswagen Jetta 1.6L L4 1588cc 97 CID Sedan FWD
1990-1992 Volkswagen Jetta 1.8L L4 1780cc Sedan FWD
1995-1998 Volkswagen Jetta 1.8L L4 1781cc 109 CID Sedan FWD
1993-1995 Volkswagen Jetta 1.8L L4 1788cc 109 CID Sedan FWD
1993-1998 Volkswagen Jetta 1.9L L4 1896cc 116 CID Sedan FWD
1990-1992 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD
1996-1996 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD
1990-1998 Volkswagen Jetta 2.0L L4 1984cc 121 CID Sedan FWD
1994-1998 Volkswagen Jetta 2.8L V6 2792cc Sedan FWD
Notes:
(1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle.
(2)100% BRAND NEW and tested to meet or exceed OEM specifications.
(3)High corrosion resistance and long service life.
(4)Bare shocks & struts set only, springs and mounts are not included.
(5)Professional Installation is Highly Recommended.
Shock absorber strut
Function:
It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car.
The following problems occur in the vehicle and the strut needs to be replaced:
(1)The car makes abnormal noises (tapping, rattling)
(2)Oil leakage.
(3)Frequent and irregular tire wear.
(4)Poor stability will make you feel very uncomfortable.
(5)The brake takes more time/distance to stop.
(6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts:
1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut.
2. Use a jack to lift the vehicle and place the chassis in a safe position.
3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system.
4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire.
5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle.
6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts.
7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut.
8. Remove the struts rod nut, upper bracket and upper insulator.
9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut.
10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time.
11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer.
12. "Road test" your vehicle immediately to ensure proper installation.
When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
| Item Specifics | |
|---|---|
| Brand | OnCarmotor |
| Items Included | Mounting Hardware |
| Type | Strut Assembly |
| Features | 100% Accuracy of Fit |
| Shock Absorber Type | Gas |
| Shock Absorber System | Double Pipe |
| Manufacturer Warranty | 1 Year |
| Material | Steel |
| Performance Part | No |
| Universal Fitment | No |
| Mounting Style | Screw-On |
| Superseded Part Number | Shock Absorber and Strut Assembly |
| Quantity | 4pcs |
| Manufacturer Part Number | 11420654 |
| Adjustable | No |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Front |
| OE/OEM Part Number | 71933 ,71265 |
| Interchange Part Number | 235614 ,343191 |
30-day free return provided.
About Us: Payment: Shipping: Returns: Contact Us: |
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Rear Left Right Struts Shocks For Volkswagen Jetta Corrado Cabrio Golf
Vehicle Fitment Information: 1995-2002 Volkswagen Cabrio 2.0L L4 1984cc 121 CID Convertible FWD 1992-1992 Volkswagen Corrado 2.8L V6 2792cc Coupe FWD 1990-1992 Volkswagen Golf 1.6L L4 1588cc 97 CID Hatchback FWD 1990-1992 Volkswagen Golf 1.8L L4 1780cc Hatchback FWD 1996-1997 Volkswagen Golf 1.8L L4 1780cc 109 CID Hatchback FWD 1993-1993 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD 1995-1999 Volkswagen Golf 1.8L L4 1781cc 109 CID Hatchback FWD 1993-1995 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD 1998-1998 Volkswagen Golf 1.8L L4 1788cc 109 CID Hatchback FWD 1993-1999 Volkswagen Golf 1.9L L4 1896cc 116 CID Hatchback FWD 1994-1995 Volkswagen Golf 2.0L L4 1984cc Hatchback FWD 1993-1999 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD 1990-1992 Volkswagen Golf 2.0L L4 1984cc 121 CID Hatchback FWD 1995-1999 Volkswagen Golf 2.8L V6 2792cc Hatchback FWD 1990-1992 Volkswagen Jetta 1.6L L4 1588cc 97 CID Sedan FWD 1990-1992 Volkswagen Jetta 1.8L L4 1780cc Sedan FWD 1995-1998 Volkswagen Jetta 1.8L L4 1781cc 109 CID Sedan FWD 1993-1995 Volkswagen Jetta 1.8L L4 1788cc 109 CID Sedan FWD 1993-1998 Volkswagen Jetta 1.9L L4 1896cc 116 CID Sedan FWD 1990-1992 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD 1996-1996 Volkswagen Jetta 2.0L L4 1984cc Sedan FWD 1990-1998 Volkswagen Jetta 2.0L L4 1984cc 121 CID Sedan FWD 1994-1998 Volkswagen Jetta 2.8L V6 2792cc Sedan FWD
Notes: (1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle. (2)100% BRAND NEW and tested to meet or exceed OEM specifications. (3)High corrosion resistance and long service life. (4)Bare shocks & struts set only, springs and mounts are not included. (5)Professional Installation is Highly Recommended.
Shock absorber strut Function: It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car. The following problems occur in the vehicle and the strut needs to be replaced: (1)The car makes abnormal noises (tapping, rattling) (2)Oil leakage. (3)Frequent and irregular tire wear. (4)Poor stability will make you feel very uncomfortable. (5)The brake takes more time/distance to stop. (6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts: 1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut. 2. Use a jack to lift the vehicle and place the chassis in a safe position. 3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system. 4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire. 5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle. 6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts. 7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut. 8. Remove the struts rod nut, upper bracket and upper insulator. 9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut. 10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time. 11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer. 12. "Road test" your vehicle immediately to ensure proper installation. When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
About Us:
We are a professional auto-parts shop, we are committed to making the best auto-parts products and providing you with better services and cost-effective prices.
If you have any questions, please contact us. Please trust us, we will reply to your questions in a short time, and provide solutions as soon as possible.
Payment:
1.Instant Paypal payment is the preferred method of payment.
2.Other payments accepted by ebay also can be accepted.
3.If you want to change the shipping address, please contact us by eBay messages (We can change the address according to the new address you provide after we check it.)
Shipping:
2-8 working days in transit.
1.Product will be shipped within 1-2 business days after full payment is received and verified.
2.All orders will be shipped from our US warehouses.
3.Packages will shipped out by the carriers below: USPS、FedEx、UPS、DHL and other carriers.
4.If you need an accurate logistics tracking number, contact us and we will provide it as soon as possible.
Returns:
30-day free return provided. 1.Return shipping is to be paid by the Buyer.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3.Please contact us via eBay email before returning the goods,We will provide a solution as soon as possible.
Contact Us:
Special Note: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Satisfaction of customers is just our untiring pursuit!
Any quesiton or problem, do contact us please. We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
We currently ship to addresses within the United States only.
Products may ship from:
Each product page clearly displays the “Ships From” location before checkout.
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
If your tracking number shows “Delivered” but you haven’t received your package:
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
You can contact us through:
Email: support@ibspot.com
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
The item must be unused, in the same condition as received, and in its original packaging.
A tracking number must be provided to confirm the return shipment.
Certain products cannot be returned, including:
Perishable goods (for example, food, flowers, newspapers, magazines)
Intimate or sanitary goods
Hazardous materials or flammable liquids/gases
Gift cards
Downloadable software
Some health and personal care items
Partial refunds may be granted in specific situations, such as:
Books with obvious signs of use
Opened CDs, DVDs, software, or vinyl records
Items not in their original condition, damaged, or missing parts not due to our error
Items returned more than 30 days after delivery
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Once your return is received and inspected:
In-store returns are refunded to the original form of payment or issued as a gift card.
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
5–7 business days for the return to reach our Returns Center.
An additional 3–10 business days for your bank to post the refund to your account.
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.
Subscribe To Our Newsletter
Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.
