Skip to main content

KAC 3268 3205 Starter For High Torque Mini Auto Trans SBF Ford 289 302 351 SFD0001

Brand: KAC
3268 3205 Starter For High Torque Mini Auto Trans SBF Ford 289 302 351 SFD0001

Description:

Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 10
Starter Type: PMGR
Brief: FORD 1989-1995

 

Part Number:

SFD0001 3205 3268 2-1806-FD 2-1806-FD-1 2-1156-FD 50-216 50-240

 

Fitment:

Please check the compatibility chart to confirm that this part will fit your vehicle before purchasing.

MAKE TYPE MODEL YEAR ENGINE
FORD Auto and Light Truck BRONCO 1992 4.9L(300) L6 A/T
FORD Auto and Light Truck BRONCO 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck BRONCO 1992-1996 5.8L(351) V8 A/T
FORD Auto and Light Truck COUNTRY SQUIRE 1990-1991 5.0L(302) V8 ALL
FORD Auto and Light Truck CROWN VICTORIA 1990-1991 5.0L(302) V8 ALL
FORD Auto and Light Truck E-SERIES VANS 1992-1996 4.9L(300) L6 A/T
FORD Auto and Light Truck E-SERIES VANS 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck E-SERIES VANS 1992-1996 5.8L(351) V8 A/T
FORD Auto and Light Truck E-SERIES VANS 1997-2003 4.2L(256) V6 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1996 4.9L(300) L6 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1997 5.8L(351) V8 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1997-1998 4.2L(256) V6 A/T
FORD Auto and Light Truck MUSTANG 1992-1995 5.0L(302) V8 ALL
FORD Auto and Light Truck MUSTANG 1994-2004 3.8L(232) V6 ALL
FORD Auto and Light Truck MUSTANG 1995 5.8L(351) V8 ALL
FORD Auto and Light Truck MUSTANG 2004 3.9L(238) V6 ALL
FORD Auto and Light Truck THUNDERBIRD 1989-1997 3.8L(232) V6 ALL
FORD Auto and Light Truck THUNDERBIRD 1991-1993 5.0L(302) V8 ALL
LINCOLN Auto and Light Truck MARK SERIES 1990-1992 5.0L(302) V8 ALL
LINCOLN Auto and Light Truck TOWN CAR 1990 5.0L(302) V8 ALL
MERCURY Auto and Light Truck COLONY PARK 1990-1991 5.0L(302) V8 ALL
MERCURY Auto and Light Truck COUGAR 1989-1997 3.8L(232) V6 ALL
MERCURY Auto and Light Truck COUGAR 1991-1993 5.0L(302) V8 ALL
MERCURY Auto and Light Truck MARQUIS 1990-1991 5.0L(302) V8 ALL

 

Description:
Built to strict quality control standards 100% factory tested.
Consistent starting power with a high quality solenoid that properly engages the starter drive with the flywheel in your vehicle every time the ignition key is turned.
High standards for components like wiring, brushes, insulation, bearings and coatings for consistent performance in all environmental conditions.
High performance machining of the starter casing for ease of installation and solid joining of the starter housing and your vehicle's mounting surfaces


How to Install a Car Starter?
1. Disconnect the battery.
2. Jack up the vehicle if need be.
3. Locate the starter.
4. Disconnect the wiring to the solenoid.
5. Remove the starter retaining bolts then the starter.
6. Compare the new starter to the old one.  Slide the starter into place.
7. Insert the starter retainer bolts.
8. Connect the wiring to the starter solenoid.
9. Reconnect the battery.
10. Listen to the vehicle as you attempt to start it.
11. Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
12. Check to see the starter solenoid is bad.


Starter Fault Check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.
 

 

 

 

 

Starter (engine):

A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power.Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.

Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:

✅The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
✅The starter thread is loose or off, and the switch or adsorption switch fails.
✅The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
✅Excitation coil or armature coil is short-circuited or disconnected.
✅The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance

In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed 5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.

(1).Disconnect the battery. 
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.

(2).Jack up the vehicle if need be. 
Ensure you jack the vehicle up on firm, level ground.

(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.

(4).Disconnect the wiring to the solenoid. 
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.

(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.

(6).Compare the new starter to the old one.  Slide the starter into place. 
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.

(7).Insert the starter retainer bolts. 
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.

(8).Connect the wiring to the starter solenoid. 
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.

(9).Reconnect the battery. 
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.

(10).Listen to the vehicle as you attempt to start it. 
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.

(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. 
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.

If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.

(12).Check to see the starter solenoid is bad. 
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.

1) we accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.

2) We will only ship to the confirmed PayPal shipping address given with the payment. Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.

3) If you want to ship to another address, please change your PayPal shipping address before you make payment.

4) To avoid initiating an unpaid item claim, please pay within 7 days.

5) Custom duties, taxes, or charges are not included in the cost you pay to us.

We only ship this item to United States !

1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.

2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.

4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.

If you send us an e-mail, it will be answered within 48 hours during our working hours.

Please feel free to contact us if you have any questions:

Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.

 

✅Dear customer, when you want to return or exchange goods
(Please contact us first, instead of directly initiating a dispute)
1: Contact the seller first
2: Send pictures: outer packaging&scanned labels&item itself&with complete accessories, etc
necessary condition
Rule A: The original packaging of the item is in an unused state.
Rule B: The outer packaging must not have any damage.
3: Obtain return label
4: Delivered Projects - Payment Repayment

✅A 15% restocking and shelving fee will be charged for returns or exchanges that are not caused by the seller and are in good condition.
Exchange will not charge restocking fees or shipping fees due to transportation errors

✅Priority
In case of the following reasons, the freight will be borne by the buyer
1: Unexpected order
2: Find a better price
3: Change your mind
4: Buy more items/make mistakes/misread model information

✅Please note
Missing accessories/quality issues/transportation damage, etc
Please contact us first to obtain a good solution, rather than directly opening a return dispute.
Thank you very much for your understanding. I hope we have a pleasant cooperation!

Contact us if you have any question, Give us a chance to serve you, negative

feedback could not solve anything, communication Please!

 

(NO)  Three stars is LOW star, NO 1,2,3 stars PLEASE!

✅(YES)  Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!

Step 3: Describe your question clearly; we will give you the best solution

 

Please leave five stars positive feedback positive comment and Five-Stars.

 

* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!

* Feedback is very important to us.

* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.

* If we don't understand these problems, we won't be able to solve them!

* After understanding the problem, we will be able to give you a satisfactory answer!

It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!

  

Your comment is very important in our business success.

✅ Free repair: During the warranty period, if the product fails due to manufacturing defects, component failure or workmanship problems, please contact us to provide corresponding handling methods.
✅ Warranty period: The warranty period is usually calculated from the date of purchase, and the specific period may vary depend on the product type and brand.
✅ Warranty terms: The repairer needs to use components and spare parts that meet the technical requirements of the product, carefully record the failure and the quality of the product after repair, and ensure that the repaired product can be used normally for more than 30 days.
✅ Extended warranty: Some manufacturers may provide additional extended warranty services, which usually require additional fees and may extend the original warranty period or provide a wider warranty coverage
✅ Note: If there are any problems with the product received, please provide all relevant videos, pictures and other clues to facilitate our cunstomer service department and processing the issuse for you . 
Thank you for your support

Brand: KAC
Isin: ISRHXDWMIGO8

$127.44

  • Free shipping in US
  • Arrives:

  • Free 30-Day returns

In Stock

Sold by , Fulfilled by IBSPOT
Ships from USA

IBspot Buyer Protection

Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

GUARANTEED SAFE CHECKOUT

More seller options

Starting from

Compare all sellers
  • MONEY BACK GUARANTEE

    30 days money back guarantee, no additional fee charged.

  • EXCELLENT SUPPORT

    We provide 24/7 online customer support via email.

  • Fast Shipping

    One week domestic shipping. Global delivery to the US in 2 weeks.

scroll to top arrow
KAC 3268 3205 Starter For High Torque Mini Auto Trans SBF Ford 289 302 351 SFD0001

KAC 3268 3205 Starter For High Torque Mini Auto Trans SBF Ford 289 302 351 SF...

$127.44

3268 3205 Starter For High Torque Mini Auto Trans SBF Ford 289 302 351 SFD0001

Description:

Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 10
Starter Type: PMGR
Brief: FORD 1989-1995

 

Part Number:

SFD0001 3205 3268 2-1806-FD 2-1806-FD-1 2-1156-FD 50-216 50-240

 

Fitment:

Please check the compatibility chart to confirm that this part will fit your vehicle before purchasing.

MAKE TYPE MODEL YEAR ENGINE
FORD Auto and Light Truck BRONCO 1992 4.9L(300) L6 A/T
FORD Auto and Light Truck BRONCO 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck BRONCO 1992-1996 5.8L(351) V8 A/T
FORD Auto and Light Truck COUNTRY SQUIRE 1990-1991 5.0L(302) V8 ALL
FORD Auto and Light Truck CROWN VICTORIA 1990-1991 5.0L(302) V8 ALL
FORD Auto and Light Truck E-SERIES VANS 1992-1996 4.9L(300) L6 A/T
FORD Auto and Light Truck E-SERIES VANS 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck E-SERIES VANS 1992-1996 5.8L(351) V8 A/T
FORD Auto and Light Truck E-SERIES VANS 1997-2003 4.2L(256) V6 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1996 4.9L(300) L6 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1996 5.0L(302) V8 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1992-1997 5.8L(351) V8 A/T
FORD Auto and Light Truck F-SERIES PICKUPS 1997-1998 4.2L(256) V6 A/T
FORD Auto and Light Truck MUSTANG 1992-1995 5.0L(302) V8 ALL
FORD Auto and Light Truck MUSTANG 1994-2004 3.8L(232) V6 ALL
FORD Auto and Light Truck MUSTANG 1995 5.8L(351) V8 ALL
FORD Auto and Light Truck MUSTANG 2004 3.9L(238) V6 ALL
FORD Auto and Light Truck THUNDERBIRD 1989-1997 3.8L(232) V6 ALL
FORD Auto and Light Truck THUNDERBIRD 1991-1993 5.0L(302) V8 ALL
LINCOLN Auto and Light Truck MARK SERIES 1990-1992 5.0L(302) V8 ALL
LINCOLN Auto and Light Truck TOWN CAR 1990 5.0L(302) V8 ALL
MERCURY Auto and Light Truck COLONY PARK 1990-1991 5.0L(302) V8 ALL
MERCURY Auto and Light Truck COUGAR 1989-1997 3.8L(232) V6 ALL
MERCURY Auto and Light Truck COUGAR 1991-1993 5.0L(302) V8 ALL
MERCURY Auto and Light Truck MARQUIS 1990-1991 5.0L(302) V8 ALL

 

Description:
Built to strict quality control standards 100% factory tested.
Consistent starting power with a high quality solenoid that properly engages the starter drive with the flywheel in your vehicle every time the ignition key is turned.
High standards for components like wiring, brushes, insulation, bearings and coatings for consistent performance in all environmental conditions.
High performance machining of the starter casing for ease of installation and solid joining of the starter housing and your vehicle's mounting surfaces


How to Install a Car Starter?
1. Disconnect the battery.
2. Jack up the vehicle if need be.
3. Locate the starter.
4. Disconnect the wiring to the solenoid.
5. Remove the starter retaining bolts then the starter.
6. Compare the new starter to the old one.  Slide the starter into place.
7. Insert the starter retainer bolts.
8. Connect the wiring to the starter solenoid.
9. Reconnect the battery.
10. Listen to the vehicle as you attempt to start it.
11. Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
12. Check to see the starter solenoid is bad.


Starter Fault Check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.
 

 

 

 

 

Starter (engine):

A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power.Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.

Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:

✅The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
✅The starter thread is loose or off, and the switch or adsorption switch fails.
✅The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
✅Excitation coil or armature coil is short-circuited or disconnected.
✅The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance

In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed 5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.

(1).Disconnect the battery. 
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.

(2).Jack up the vehicle if need be. 
Ensure you jack the vehicle up on firm, level ground.

(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.

(4).Disconnect the wiring to the solenoid. 
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.

(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.

(6).Compare the new starter to the old one.  Slide the starter into place. 
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.

(7).Insert the starter retainer bolts. 
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.

(8).Connect the wiring to the starter solenoid. 
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.

(9).Reconnect the battery. 
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.

(10).Listen to the vehicle as you attempt to start it. 
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.

(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. 
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.

If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.

(12).Check to see the starter solenoid is bad. 
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.

1) we accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.

2) We will only ship to the confirmed PayPal shipping address given with the payment. Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.

3) If you want to ship to another address, please change your PayPal shipping address before you make payment.

4) To avoid initiating an unpaid item claim, please pay within 7 days.

5) Custom duties, taxes, or charges are not included in the cost you pay to us.

We only ship this item to United States !

1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.

2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.

4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.

If you send us an e-mail, it will be answered within 48 hours during our working hours.

Please feel free to contact us if you have any questions:

Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.

 

✅Dear customer, when you want to return or exchange goods
(Please contact us first, instead of directly initiating a dispute)
1: Contact the seller first
2: Send pictures: outer packaging&scanned labels&item itself&with complete accessories, etc
necessary condition
Rule A: The original packaging of the item is in an unused state.
Rule B: The outer packaging must not have any damage.
3: Obtain return label
4: Delivered Projects - Payment Repayment

✅A 15% restocking and shelving fee will be charged for returns or exchanges that are not caused by the seller and are in good condition.
Exchange will not charge restocking fees or shipping fees due to transportation errors

✅Priority
In case of the following reasons, the freight will be borne by the buyer
1: Unexpected order
2: Find a better price
3: Change your mind
4: Buy more items/make mistakes/misread model information

✅Please note
Missing accessories/quality issues/transportation damage, etc
Please contact us first to obtain a good solution, rather than directly opening a return dispute.
Thank you very much for your understanding. I hope we have a pleasant cooperation!

Contact us if you have any question, Give us a chance to serve you, negative

feedback could not solve anything, communication Please!

 

(NO)  Three stars is LOW star, NO 1,2,3 stars PLEASE!

✅(YES)  Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!

Step 3: Describe your question clearly; we will give you the best solution

 

Please leave five stars positive feedback positive comment and Five-Stars.

 

* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!

* Feedback is very important to us.

* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.

* If we don't understand these problems, we won't be able to solve them!

* After understanding the problem, we will be able to give you a satisfactory answer!

It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!

  

Your comment is very important in our business success.

✅ Free repair: During the warranty period, if the product fails due to manufacturing defects, component failure or workmanship problems, please contact us to provide corresponding handling methods.
✅ Warranty period: The warranty period is usually calculated from the date of purchase, and the specific period may vary depend on the product type and brand.
✅ Warranty terms: The repairer needs to use components and spare parts that meet the technical requirements of the product, carefully record the failure and the quality of the product after repair, and ensure that the repaired product can be used normally for more than 30 days.
✅ Extended warranty: Some manufacturers may provide additional extended warranty services, which usually require additional fees and may extend the original warranty period or provide a wider warranty coverage
✅ Note: If there are any problems with the product received, please provide all relevant videos, pictures and other clues to facilitate our cunstomer service department and processing the issuse for you . 
Thank you for your support

DataCaciques
  • UPC: Does not apply
  • Brand: KAC
  • Type: Starter Motor
  • Voltage: 12 V
  • Manufacturer Part Number: ZC1STR017401-US
  • Manufacturer Warranty: 5 Years
  • Superseded Part Number: 3268 SA-769A SA-841 SA-911 SR110131 SR110648 2-1806-FD
  • Teeth: 10
  • Rotation: Clockwise(CW)
  • Universal Fitment: No
  • Fitment Type: Direct Replacement
  • KW: 1.4
  • Reference Part Number: E9SF-AA E9SF-BA F7SU-A1B F7SU-AA F7SU-AB 410-14023 3205
  • Compatibility: Starter For FORD LINCOLN MERCURY
  • Finish: New Quality
  • Part Type: Starter
  • Package: 25.00(L) * 17.00(W) * 12.00(H)
  • Number of Pieces: 1
  • Non-Domestic Product: No
  • Custom Bundle: No
  • Modified Item: No
  • Other Part Number: F7SU-11000-AA F7SU-11000-AB F7SZ-11002-AA 3C24-AA 2-1806-FD-1
  • Interchange Part Number 1: SFD0001 111183 10465338 SA-769 323-508 336-1114 336-1809
  • Interchange Part Number 2: 3C2Z-11002-AA E9SF-11000-AA 19011928 3C24-11000-AA
  • Interchange Part Number 3: E9SZ-11002-B F7SU-11000-A1B E9SF-11000-BA E9SZ-11002-A

 

Processing Time

  • We process and ship orders Monday through Friday, excluding holidays.
  • Most orders are processed within 1–3 business days, depending on product availability.
  • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

Shipping Coverage

We currently ship to addresses within the United States only.

Products may ship from:

  • Our U.S. warehouses, or
  • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

Each product page clearly displays the “Ships From” location before checkout.


Shipping Methods & Estimated Delivery

 

Shipping Method Estimated Delivery Cost
Free Shipping (US) 5–10 business days Free, available on eligible items
Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $3.00 each additional
Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
Extended Delivery (Ships from Overseas Warehouse) 10–15 business days $14.50 for the first item, $4.00 each additional

Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

Free Shipping

We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


Carriers

We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


Import Duties & Taxes

All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


Tracking & Notifications

Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

You can track your shipment anytime using the Track Your Order page on our website.


Order Changes & Cancellations

If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

Contact: support@ibspot.com


Item Not Received

If your tracking number shows “Delivered” but you haven’t received your package:

  1. Check with your local USPS or UPS office.
  2. Confirm that the shipping address provided was correct.
  3. If the issue remains unresolved, contact support@ibspot.com for assistance.

Damaged or Lost Parcels

If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


Customer Support

For any questions about shipping, tracking, or delivery, our customer support team is here to help.

Email: support@ibspot.com

We’re always happy to help.

Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


Order Cancellation Policy

Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

How to Request a Cancellation

You can contact us through:

Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


Return Policy

We accept returns for most items within 30 days of delivery for a full refund.

To be eligible for a return:

  • The item must be unused, in the same condition as received, and in its original packaging.

  • A tracking number must be provided to confirm the return shipment.

Non-Returnable Items

Certain products cannot be returned, including:

  • Perishable goods (for example, food, flowers, newspapers, magazines)

  • Intimate or sanitary goods

  • Hazardous materials or flammable liquids/gases

  • Gift cards

  • Downloadable software

  • Some health and personal care items

Partial Refunds (If Applicable)

Partial refunds may be granted in specific situations, such as:

  • Books with obvious signs of use

  • Opened CDs, DVDs, software, or vinyl records

  • Items not in their original condition, damaged, or missing parts not due to our error

  • Items returned more than 30 days after delivery


How to Return an Item

To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.


Shipping Cost for Returns

Please contact us before returning any item.
We will provide a free return shipping label.

If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.


Refund Processing

Once your return is received and inspected:

  • In-store returns are refunded to the original form of payment or issued as a gift card.

  • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

Please allow:

  • 5–7 business days for the return to reach our Returns Center.

  • An additional 3–10 business days for your bank to post the refund to your account.


Damages, Issues & Claims

Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.

Product Claims

Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


Exchanges

We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


Return Address

IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States


Customer Support

Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

Email: support@ibspot.com
Contact Form: Contact Us page

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Subscribe To Our Newsletter

Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.