Iron Rock Off Road JK/JL Rear Bump Stop Extension (Length: 2")
Iron Rock Off Road JK/JL Rear Bump Stop Extension (Length: 2")
Iron Rock Off Road JK/JL Rear Bump Stop Extension (Length: 2")
This kit will allow you to choose your bump stop extension from 2-4" of
additional bump stop to reduce the risk of damaging your tires or
fenders from getting damaged under full suspension compression.
How to
choose the length:
Actual lift height:
It is very important that you do not use the
manufacturers advertised lift height for any calculations. Always use a hub to
fender measurement with the vehicle loaded the way it is typically used. If you
usually carry tools and spare parts, have them in the vehicle when you measure.
Also fuel weighs about 8lbs per gallon so measure with a full tank for bump
stop purposes. Hub to fender measurement is measured from the center of the
tire/wheel vertically to the bottom of the fender or fender flare. Measure on
flat ground and measure all 4 corners because they always vary from side to
side. Average the left and right measurements but keep the front and rear
measurements separate.
What is your goal?
OEM up travel:
If you just want OEM suspension up travel then
extend your bump stops by your actual lift height (see hub to fender
measurement procedure above).
Extra up travel:
If you want a little bit of extra up travel then
extend your bump stops by a little less than your lift height. For example, for
a 4" actual lift height extend the bump stops 3.5", or whatever you
think is best for you. We think 1/2" additional up travel is great for
general use.
Maximum tire clearance:
If you are looking for maximum tire clearance then
use an RTI ramp, trail obstacle, or other method to cycle the suspension. You
must have your lift kit and tire combination in place to use this method.
Simply cycle your suspension to the maximum travel you want to allow (remember
to cycle your steering lock to lock). Then measure from the middle of your bump
stop to the bump stop pad. This is the amount to extend your bump stops.
Remember to consider the worst-case scenario. For example, going downhill will
push harder on the front bump stops, or as one tire droops more the other tire
stuffs more even after contact with the bump stop (because of the location of
the bump stops). So, you may want to add 1/2" or more to your measurement
or be sure you measure using worst case scenario. We do not recommend extending
bump stops more than your actual lift height (again, see hub to fender
measurement procedure above).
Jeep JK Bump Stop Extensions
Let’s be honest, Jeeps are toys for big kids. Build it how you want it and who cares what anyone else says. Bigger tires are often the first upgrade a new JK owner wants to do. After researching a bit, you often find that a suspension lift is going to be needed to clear the bigger tires tires on the street. If you continue your research into what is needed to keep the tires from rubbing on the fenders while off road you will find that Jeep JK Bump Stop Extensions are a great solution.
Why Jeep JK Bump Stop Extensions
The design of the JK front bump stop extensions is for the purpose of stopping the upwards travel of your front axle. Why? The OEM bumpstops are not long enough to prevent your tires from rubbing on your fenders. Jeep JK rear bump stop extensions will allow you to run larger tires and still take it off road without ripping your rear fender flares off.
Setting your Jeep up for Success
Equipping your Jeep with the right bump stops will mean that you can enjoy an off-road trip without fear of damaging tire interference. When you need to ensure your suspension is flexy but set up appropriately so that you can safely run larger tires.
| Brand: | Iron Rock Off Road |
|---|---|
| Isin: | IZPOV2IECEJZ |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
This kit will allow you to choose your bump stop extension from 2-4" of
additional bump stop to reduce the risk of damaging your tires or
fenders from getting damaged under full suspension compression.
How to
choose the length:
Actual lift height:
It is very important that you do not use the
manufacturers advertised lift height for any calculations. Always use a hub to
fender measurement with the vehicle loaded the way it is typically used. If you
usually carry tools and spare parts, have them in the vehicle when you measure.
Also fuel weighs about 8lbs per gallon so measure with a full tank for bump
stop purposes. Hub to fender measurement is measured from the center of the
tire/wheel vertically to the bottom of the fender or fender flare. Measure on
flat ground and measure all 4 corners because they always vary from side to
side. Average the left and right measurements but keep the front and rear
measurements separate.
What is your goal?
OEM up travel:
If you just want OEM suspension up travel then
extend your bump stops by your actual lift height (see hub to fender
measurement procedure above).
Extra up travel:
If you want a little bit of extra up travel then
extend your bump stops by a little less than your lift height. For example, for
a 4" actual lift height extend the bump stops 3.5", or whatever you
think is best for you. We think 1/2" additional up travel is great for
general use.
Maximum tire clearance:
If you are looking for maximum tire clearance then
use an RTI ramp, trail obstacle, or other method to cycle the suspension. You
must have your lift kit and tire combination in place to use this method.
Simply cycle your suspension to the maximum travel you want to allow (remember
to cycle your steering lock to lock). Then measure from the middle of your bump
stop to the bump stop pad. This is the amount to extend your bump stops.
Remember to consider the worst-case scenario. For example, going downhill will
push harder on the front bump stops, or as one tire droops more the other tire
stuffs more even after contact with the bump stop (because of the location of
the bump stops). So, you may want to add 1/2" or more to your measurement
or be sure you measure using worst case scenario. We do not recommend extending
bump stops more than your actual lift height (again, see hub to fender
measurement procedure above).
Jeep JK Bump Stop Extensions
Let’s be honest, Jeeps are toys for big kids. Build it how you want it and who cares what anyone else says. Bigger tires are often the first upgrade a new JK owner wants to do. After researching a bit, you often find that a suspension lift is going to be needed to clear the bigger tires tires on the street. If you continue your research into what is needed to keep the tires from rubbing on the fenders while off road you will find that Jeep JK Bump Stop Extensions are a great solution.
Why Jeep JK Bump Stop Extensions
The design of the JK front bump stop extensions is for the purpose of stopping the upwards travel of your front axle. Why? The OEM bumpstops are not long enough to prevent your tires from rubbing on your fenders. Jeep JK rear bump stop extensions will allow you to run larger tires and still take it off road without ripping your rear fender flares off.
Setting your Jeep up for Success
Equipping your Jeep with the right bump stops will mean that you can enjoy an off-road trip without fear of damaging tire interference. When you need to ensure your suspension is flexy but set up appropriately so that you can safely run larger tires.
- Brand: Iron Rock Off Road
- Manufacturer Part Number: IRO-13465
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.