B&K Precision 2704C KIT Manual Ranging Tool Kit Digital Multimeter with Test Leads
B&K Precision 2704C KIT Manual Ranging Tool Kit Digital Multimeter with Test Leads
B&K Precision 2704C KIT Manual Ranging Tool Kit Digital Multimeter with Test Leads
Product Overview
- Manual-ranging digital multimeter measures voltage, current, and capacitance, and performs diode, continuity, logic, and transistor common-emitter gain (hFE) tests
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
- Magnetic hanger and built-in stand free hands for managing test leads
- Hold function keeps a reading on the display, even after the meter is disconnected
- Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Pollution Degree 2 for indoor use
| Brand: | B&K Precision |
|---|---|
| Size: | With Test Leads |
| Manufacturer: | B&K Precision Corporation |
| Part Number: | 2704C KIT |
| Model: | 2704C KIT |
| Product Dimensions: | 7.0 x 5.2 x 2.7 inches; 1.3 pounds |
| Isin: | ILD5Y2SKCBCJ |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
Product Overview
- Manual-ranging digital multimeter measures voltage, current, and capacitance, and performs diode, continuity, logic, and transistor common-emitter gain (hFE) tests
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
- Magnetic hanger and built-in stand free hands for managing test leads
- Hold function keeps a reading on the display, even after the meter is disconnected
- Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Pollution Degree 2 for indoor use
| Brand: | B&K Precision |
|---|---|
| Size: | With Test Leads |
| Manufacturer: | B&K Precision Corporation |
| Part Number: | 2704C KIT |
| Model: | 2704C KIT |
| Product Dimensions: | 7.0 x 5.2 x 2.7 inches; 1.3 pounds |
| Isin: | ILD5Y2SKCBCJ |
The B&K Precision 2704C kit digital multimeter (also known as a multitester) is an average-sensing, manual-ranging meter that measures current, voltage, resistance, and capacitance, and performs diode, continuity, logic, and transistor common-emitter gain (hFE) tests in electrical applications. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. The hFE test measures a transistor's common-emitter gain, and a logic test analyzes digital signals. A data hold function keeps a reading on the display for recording, even after the meter has been disconnected. The LCD is backlit for readability in low light. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. A low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use.
This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets European Union EMC (EN) EN61326, International Electrotechnical Commission (IEC) safety standard 61010, and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Pollution Degree 2 for indoor use. The meter includes test leads, probe bodies, alligator clips, a spare fuse, a 9V battery, and instructions.
##### Specifications
Maximum alternating current (AC) input| 10 amp ---|--- Maximum direct current (DC) input| 10 amp Maximum AC voltage input| 750V Maximum DC voltage input| 1000V Maximum resistance detected| 2,000 megaohms Maximum capacitance detected| 20 microfarads Frequency counter| To 20Mhz Tests| Diode, continuity, logic, and hFE transistor test Power supply| 9V battery (one, installed) Safety ratings| European Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326 Weight| Approximately 10oz./285g (including battery and hanger) Dimensions| 165 x 78 x 42.5mm/6.5 x 3.1 x 1.7 inches (H x W x D)
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
##### What's in the Box?
* B&K Precision 2704C digital multimeter * 4mm straight-to-right-angle silicone leads, 1.5m * Probe bodies with 0.2mm tip * Alligator-style clips (2) * Spare fuse * 9V battery * Instructions
This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets European Union EMC (EN) EN61326, International Electrotechnical Commission (IEC) safety standard 61010, and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Pollution Degree 2 for indoor use. The meter includes test leads, probe bodies, alligator clips, a spare fuse, a 9V battery, and instructions.
##### Specifications
Maximum alternating current (AC) input| 10 amp ---|--- Maximum direct current (DC) input| 10 amp Maximum AC voltage input| 750V Maximum DC voltage input| 1000V Maximum resistance detected| 2,000 megaohms Maximum capacitance detected| 20 microfarads Frequency counter| To 20Mhz Tests| Diode, continuity, logic, and hFE transistor test Power supply| 9V battery (one, installed) Safety ratings| European Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326 Weight| Approximately 10oz./285g (including battery and hanger) Dimensions| 165 x 78 x 42.5mm/6.5 x 3.1 x 1.7 inches (H x W x D)
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
##### What's in the Box?
* B&K Precision 2704C digital multimeter * 4mm straight-to-right-angle silicone leads, 1.5m * Probe bodies with 0.2mm tip * Alligator-style clips (2) * Spare fuse * 9V battery * Instructions
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.