100M/328FT OM3/OM4 LC to LC Outdoor Armored Fiber Optic Patch Cable, Multimode Duplex 50/125μm, 10Gb/40Gb/100Gb, Industrial TPU Jacket, Direct Burial, Uniboot, MMF, OD 5mm, Pulling Eye Kit Installed
100M/328FT OM3/OM4 LC to LC Outdoor Armored Fiber Optic Patch Cable, Multimode Duplex 50/125μm, 10Gb/40Gb/100Gb, Industrial TPU Jacket, Direct Burial, Uniboot, MMF, OD 5mm, Pulling Eye Kit Installed
100M/328FT OM3/OM4 LC to LC Outdoor Armored Fiber Optic Patch Cable, Multimode Duplex 50/125μm, 10Gb/40Gb/100Gb, Industrial TPU Jacket, Direct Burial, Uniboot, MMF, OD 5mm, Pulling Eye Kit Installed
- 【Rugged Outdoor-Grade TPU Jacket】This armored fiber optic cable features a thick industrial TPU jacket with excellent tensile strength, UV resistance, abrasion protection, and waterproof performance. Built for long-term reliability in harsh environments like snowfields, deserts, mountain ridges, tunnels, coastal zones, rooftops, factories, roadside trenches, and construction sites. Supports direct burial, conduit routing, or overhead use. Available in 5m to 300m lengths for residential and commercial deployments.
- 【Dual Armored Construction for Protection】Built with a stainless steel spiral armor tube and inner fiberglass yarns, this outdoor fiber cable provides double-layer mechanical protection against crushing, rodent chewing, sharp bending, and pulling stress. With an outer diameter of 5.0mm, it offers significantly more resistance to physical damage than standard 3.0mm fiber cables, making it ideal for direct burial, industrial campuses, outdoor conduits, and environments with heavy foot or vehicle traffic. Engineered for long-term durability in harsh conditions.
- 【Pre-Installed Pulling Eye for Easy Deployment】The cable comes pre-terminated with a swivel pulling eye kit on one end, allowing for efficient and safe pulling through conduits, ducts, bridge trays, risers, telecom manholes, and underground raceways. It eliminates the risk of fiber damage during long-distance installations. The pulling eye cover is removable and reusable, making it ideal for multi-phase construction, structured cabling, building backbone links, outdoor trench routing, industrial campuses, and FTTH deployments across large properties.
- 【OM3/OM4 High-Speed Transmission up to 100Gbps】This armored fiber optic cable uses 50/125μm multimode fiber to support high-speed Ethernet connectivity. At 850nm wavelength, OM3 supports 10Gbps up to 300m, 40Gbps up to 100m, and 100Gbps up to 70m; OM4 extends these distances to 400m, 150m, and 100m respectively. Ideal for data center backbones, enterprise LANs, telecom rooms, FTTH deployments, server farms, campus networks, SAN/NAS storage interconnects, broadcast studios, control systems, surveillance backhauls, and other high-density, high-bandwidth fiber optic infrastructure.
- 【Space-Saving Uniboot & Broad Device Compatibility】LC uniboot connectors reduce cable clutter and enable quick polarity reversal—ideal for dense patching environments. This cable supports 1G/10G/25G/40G/100G SFP/SFP+/XFP/QSFP+ modules, and integrates smoothly with Ethernet switches, routers, firewalls, ONU/OLT terminals, media converters, patch panels, NICs, NVR systems, fiber mux/demux units, and industrial control equipment. Compatible with Cisco, Ubiquiti, Mikrotik, Juniper, HPE, Arista, TP-Link, Netgear, Intel, Fortinet, Zyxel, Mellanox, Supermicro, Huawei, ZTE, Brocade, D-Link, and others.
| Brand: | ERSTICKT |
|---|---|
| Size: | 100m / 328.08ft |
| Color: | Black |
| Manufacturer: | ERSTICKT |
| Part Number: | SJ1VS3V |
| Isin: | INNJ9D6SZO8J |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
The 100m (328ft) LC to LC Outdoor Armored Fiber Optic Patch Cable is purpose-built for high-bandwidth transmission and complex routing in harsh environments. Featuring bend-insensitive OM3/OM4 multimode fiber and dual-layer mechanical protection, it delivers dependable performance in mission-critical deployments such as data centers, telecom rooms, and FTTH networks.
Enhanced Engineering Features:
- 5mm vs 3mm Durability: The 5.0mm OD cable offers superior crush resistance and tensile strength compared to 3.0mm standard cables, ensuring longer lifespan and stability in industrial or buried installations.
- Waterproof & Crush-Resistant: Designed to withstand up to 3000N of crush force and long-term tension of 200N, the cable resists water ingress and external pressure—ideal for underground and conduit environments.
- Optimized for Conduit Pulling: With a pre-installed pulling eye, the cable supports secure, damage-free routing through long conduits, floors, risers, and bridge trays—reducing installation time and cost.
5 Key Innovations:
- Streamlined Deployment: Unlike conventional jumpers, ERSTICKT’s pre-installed pulling eye cuts labor by up to 40% in complex routes like vertical risers and outdoor conduits.
- TPU Jacket Longevity: Industrial TPU outer jacket resists UV, salt fog, and thermal aging—retains flexibility even after 20 years in sun, snow, or coastal humidity.
- Double Armor Impact Protection: Built-in stainless steel spiral tube + fiberglass yarns guard against rodent bites and foot traffic pressure.
- Eco-Friendly Reusability: Pulling eye is removable and reusable—supports sustainable, low-waste deployments.
- Uniboot Flexibility: LC Uniboot duplex connectors allow tool-free polarity reversal, ideal for rack management and modular upgrades.
OM3/OM4 Transmission Distances:
- OM3: 10Gbps @ 300m, 40Gbps @ 100m
- OM4: 10Gbps @ 400m, 40Gbps @ 150m, 100Gbps @ 100m
Technical Specifications:
- Connector Type: LC to LC (Uniboot, UPC polish)
- Fiber Type: OM3/OM4 Multimode, 50/125μm, bend-insensitive
- Insertion Loss: ≤0.3dB (≤100m), ≤0.6dB (100–200m), ≤0.9dB (200–300m)
- Return Loss: ≥55dB
- Outer Jacket: Black industrial-grade TPU, OD 5.0mm
- Armor: Stainless steel spiral tube + reinforced fiberglass yarns
- Tensile Strength: 200N (long term) / 600N (short term)
- Crush Resistance: 2000N/3000N (long/short term)
- Operating Temperature: -40°C ~ +80°C
- Lengths Available: 5m (16ft) to 300m (984ft)
Application Scenarios:
- Data center backbone cabling & high-density patching
- SAN/NAS fiber interconnects and storage networks
- Telecom room fiber runs, ONU/OLT deployments
- FTTH/FTTB access and fiber cabinet extensions
- 4K/8K IP camera surveillance backhaul
- Smart building and campus fiber links
- Tunnel, bridge, and railway signaling systems
- Industrial control networks, PLC fiber connectivity
- Offshore wind farms, substation monitoring
- Harsh outdoor sites: coastal, desert, mountaintop
Device Compatibility:
Compatible with Cisco, Ubiquiti UniFi, Mikrotik, HPE, Juniper, Netgear, TP-Link, Intel, Fortinet, Arista, Supermicro, Huawei, ZTE, and more.
Supports SFP, SFP+, QSFP+, QSFP28, and XFP transceivers; routers, switches, ONU/OLT ports, patch panels, NICs, media converters, and DWDM/CWDM equipment.
ERSTICKT armored fiber cables are engineered for high-bandwidth, long-distance, and harsh-environment deployments—ensuring performance, reliability, and sustainable installation at scale.
Enhanced Engineering Features:
- 5mm vs 3mm Durability: The 5.0mm OD cable offers superior crush resistance and tensile strength compared to 3.0mm standard cables, ensuring longer lifespan and stability in industrial or buried installations.
- Waterproof & Crush-Resistant: Designed to withstand up to 3000N of crush force and long-term tension of 200N, the cable resists water ingress and external pressure—ideal for underground and conduit environments.
- Optimized for Conduit Pulling: With a pre-installed pulling eye, the cable supports secure, damage-free routing through long conduits, floors, risers, and bridge trays—reducing installation time and cost.
5 Key Innovations:
- Streamlined Deployment: Unlike conventional jumpers, ERSTICKT’s pre-installed pulling eye cuts labor by up to 40% in complex routes like vertical risers and outdoor conduits.
- TPU Jacket Longevity: Industrial TPU outer jacket resists UV, salt fog, and thermal aging—retains flexibility even after 20 years in sun, snow, or coastal humidity.
- Double Armor Impact Protection: Built-in stainless steel spiral tube + fiberglass yarns guard against rodent bites and foot traffic pressure.
- Eco-Friendly Reusability: Pulling eye is removable and reusable—supports sustainable, low-waste deployments.
- Uniboot Flexibility: LC Uniboot duplex connectors allow tool-free polarity reversal, ideal for rack management and modular upgrades.
OM3/OM4 Transmission Distances:
- OM3: 10Gbps @ 300m, 40Gbps @ 100m
- OM4: 10Gbps @ 400m, 40Gbps @ 150m, 100Gbps @ 100m
Technical Specifications:
- Connector Type: LC to LC (Uniboot, UPC polish)
- Fiber Type: OM3/OM4 Multimode, 50/125μm, bend-insensitive
- Insertion Loss: ≤0.3dB (≤100m), ≤0.6dB (100–200m), ≤0.9dB (200–300m)
- Return Loss: ≥55dB
- Outer Jacket: Black industrial-grade TPU, OD 5.0mm
- Armor: Stainless steel spiral tube + reinforced fiberglass yarns
- Tensile Strength: 200N (long term) / 600N (short term)
- Crush Resistance: 2000N/3000N (long/short term)
- Operating Temperature: -40°C ~ +80°C
- Lengths Available: 5m (16ft) to 300m (984ft)
Application Scenarios:
- Data center backbone cabling & high-density patching
- SAN/NAS fiber interconnects and storage networks
- Telecom room fiber runs, ONU/OLT deployments
- FTTH/FTTB access and fiber cabinet extensions
- 4K/8K IP camera surveillance backhaul
- Smart building and campus fiber links
- Tunnel, bridge, and railway signaling systems
- Industrial control networks, PLC fiber connectivity
- Offshore wind farms, substation monitoring
- Harsh outdoor sites: coastal, desert, mountaintop
Device Compatibility:
Compatible with Cisco, Ubiquiti UniFi, Mikrotik, HPE, Juniper, Netgear, TP-Link, Intel, Fortinet, Arista, Supermicro, Huawei, ZTE, and more.
Supports SFP, SFP+, QSFP+, QSFP28, and XFP transceivers; routers, switches, ONU/OLT ports, patch panels, NICs, media converters, and DWDM/CWDM equipment.
ERSTICKT armored fiber cables are engineered for high-bandwidth, long-distance, and harsh-environment deployments—ensuring performance, reliability, and sustainable installation at scale.
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.