jonpaultrek2012 ™ Star Trek, HERO Metal Fin Replacement, Metal Phaser Part
jonpaultrek2012 ™ Star Trek, HERO Metal Fin Replacement, Metal Phaser Part
jonpaultrek2012 ™ Star Trek, HERO Metal Fin Replacement, Metal Phaser Part
In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include whatever; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You.
Type II Phaser, Star Trek, Phaser Metal Parts, HERO Rear Fins
Star Trek, TOS, Phaser Metal Fins, fits; AA/DS and all similar shells, Type II Phaser Bodies
PRICE IS FOR EACH FIN BLOCK. Photo's include this item shown installed on a Phaser Body. These photos are for context reference only. Phaser NOT part of sale.
- FITS: AA/DS Star Trek TOS Type II Phaser, Metal Fins, these will fit directly onto an AA/DS Phaser and are easy to fit to all other P2 bodies.
Hand Machined aluminum, polished, Acute Trapezoid shape as TOS original. Dimensional Design details primarily based on Roddenberry Hero Resin Kit.
Can fit all other prop kits. You are the prop maker!!
Check out the awesome jewelry like finishes. These are milled "one-at-a-time" from a single block of 6063-T5 (HE-6) aluminum, just gorgeous. NOT cast zinc. NOT extruded aluminum that is chopped and polished.
Fitting to the toy phaser or or other prop, such as fiberglass or resin, is most likely required. Not a drop in part most of the time.
Dimensions: 1.418 o.a. x .9510 o.a. wide x 3/8" thick. Notch to fit into P2 is .495 wide x 3/8" high.
Photo shows: (a) fin mounted on a phaser end with the corners slightly sanded-off and some 200 grit graining added to other surfaces and black paint inside fin gaps. Paint Fins black then sand off the corners and flat edges to duplicate this look. You do that part. (b) two loose fins are shown on the pristine condition as they will ship to you.
The aluminum is NOT ANODIZED and is of a more workable alloy type than others on the market. Why?, I used a special 6063-T5 (HE-6) un-anodized aluminum because it is workable by a prop builder. Anodizing hardens the material surface and that’s not always good because anodizing makes it difficult work the component. Not anodized because anodizing makes it hard to; machine, grain and/or, further polish, the Fins.
METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE!
Some Star Trek Prop History For Inquiring Minds:
Most of these Prop Makers and Technicians have passed-on.
Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories)
Mr. Greg Jein was a very well known Star Trek TOS prop collector and authority (born October 31, 1945 in Los Angeles, USA; died May 22, 2022 in Los Angeles). He had personal friendships with all the listed Star Trek TOS production prop craftsmen (Bob Stone, James Rugg, Richard Heimer, John Dwyer, and Mr. Ruck).
Greg was an acquaintance of mine (Jon-Paul L), and generously took the time to meet me in California on several occasions, beginning in 2018 right through 2021. He shall be missed.
Mr. Jein was a filming model designer who, starting in the 1970s’, created miniatures for use in the special effects portions of many films and television series. Mr. Jein was nominated for an Academy Award for Best Visual Effects for “Close Encounters of the Third Kind” (1977) and, nominated for an Outstanding Special Visual Effects Emmy for “Angels in America” (1979).
In the 1970s’ Greg worked onTV productions such as “Wonder Woman”, and “The UFO Incident”. Jein then went on to work on Spielberg's film “1941”, where he and his team constructed a number of models including a twelve-foot model of the Ferris wheel that's dislodged from its mount and rolls down the pier and into the water. For their work on “1941” Jein, William A. Fraker and A. D. Flowers were again nominated for an Academy Award for Best Visual Effects.
Then in the 1980’s Greg Jein was invited to work on “Star Trek: The Motion Picture” building planetary models for Spock's spacewalk scene and the interior of the V'Ger craft. Jein continued his association with Star Trek Films, building alien weapons for: “Star Trek V The Final Frontier”, Starfleet helmets for the assassination scene in “Star Trek VI The Undiscovered Country”. In 1986 for “Star Trek The Next Generation” Jein and a team at Industrial Light & Magic (ALM) built the original six-foot model of the USS Enterprise (NCC-1701-D), the Ferengi Marauder starship and, the Klingon Vor'cha.
BACK TO STAR TREK TOS 1966 THRU 1969
Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.
Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).
Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props.
Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage.
James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James.
In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart.
The jonpaultrek2012™® company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.
INTERNATIONAL ORDER TRANSIT TIMES DEPENDS ENTIRELY ON: (a) THE LOCAL DESTINATION TRANSIT TIMES, AND (b) LOCAL DESTINATION CUSTOMS CLEARANCE TIME. THIS EBAY SELLER IS NOT RESPONSIBLE FOR YOUR LOCAL CARRIER AND LOCAL CUSTOMS OFFICE SLOW PROCESSING. TRACK ALL ORDERS THROUGH EBAY AND INQUIRE ON ALL DELAYS BY CONTACTING EBAY.
SD Studios SDStudios sci-fi-props scifiprops
| Brand: | jonpaultrek2012 ™ |
|---|---|
| Isin: | IZSO1HHKOADR |
This product is not available in the selected country
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include whatever; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You.
Type II Phaser, Star Trek, Phaser Metal Parts, HERO Rear Fins
Star Trek, TOS, Phaser Metal Fins, fits; AA/DS and all similar shells, Type II Phaser Bodies
PRICE IS FOR EACH FIN BLOCK. Photo's include this item shown installed on a Phaser Body. These photos are for context reference only. Phaser NOT part of sale.
- FITS: AA/DS Star Trek TOS Type II Phaser, Metal Fins, these will fit directly onto an AA/DS Phaser and are easy to fit to all other P2 bodies.
Hand Machined aluminum, polished, Acute Trapezoid shape as TOS original. Dimensional Design details primarily based on Roddenberry Hero Resin Kit.
Can fit all other prop kits. You are the prop maker!!
Check out the awesome jewelry like finishes. These are milled "one-at-a-time" from a single block of 6063-T5 (HE-6) aluminum, just gorgeous. NOT cast zinc. NOT extruded aluminum that is chopped and polished.
Fitting to the toy phaser or or other prop, such as fiberglass or resin, is most likely required. Not a drop in part most of the time.
Dimensions: 1.418 o.a. x .9510 o.a. wide x 3/8" thick. Notch to fit into P2 is .495 wide x 3/8" high.
Photo shows: (a) fin mounted on a phaser end with the corners slightly sanded-off and some 200 grit graining added to other surfaces and black paint inside fin gaps. Paint Fins black then sand off the corners and flat edges to duplicate this look. You do that part. (b) two loose fins are shown on the pristine condition as they will ship to you.
The aluminum is NOT ANODIZED and is of a more workable alloy type than others on the market. Why?, I used a special 6063-T5 (HE-6) un-anodized aluminum because it is workable by a prop builder. Anodizing hardens the material surface and that’s not always good because anodizing makes it difficult work the component. Not anodized because anodizing makes it hard to; machine, grain and/or, further polish, the Fins.
METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE!
Some Star Trek Prop History For Inquiring Minds:
Most of these Prop Makers and Technicians have passed-on.
Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories)
Mr. Greg Jein was a very well known Star Trek TOS prop collector and authority (born October 31, 1945 in Los Angeles, USA; died May 22, 2022 in Los Angeles). He had personal friendships with all the listed Star Trek TOS production prop craftsmen (Bob Stone, James Rugg, Richard Heimer, John Dwyer, and Mr. Ruck).
Greg was an acquaintance of mine (Jon-Paul L), and generously took the time to meet me in California on several occasions, beginning in 2018 right through 2021. He shall be missed.
Mr. Jein was a filming model designer who, starting in the 1970s’, created miniatures for use in the special effects portions of many films and television series. Mr. Jein was nominated for an Academy Award for Best Visual Effects for “Close Encounters of the Third Kind” (1977) and, nominated for an Outstanding Special Visual Effects Emmy for “Angels in America” (1979).
In the 1970s’ Greg worked onTV productions such as “Wonder Woman”, and “The UFO Incident”. Jein then went on to work on Spielberg's film “1941”, where he and his team constructed a number of models including a twelve-foot model of the Ferris wheel that's dislodged from its mount and rolls down the pier and into the water. For their work on “1941” Jein, William A. Fraker and A. D. Flowers were again nominated for an Academy Award for Best Visual Effects.
Then in the 1980’s Greg Jein was invited to work on “Star Trek: The Motion Picture” building planetary models for Spock's spacewalk scene and the interior of the V'Ger craft. Jein continued his association with Star Trek Films, building alien weapons for: “Star Trek V The Final Frontier”, Starfleet helmets for the assassination scene in “Star Trek VI The Undiscovered Country”. In 1986 for “Star Trek The Next Generation” Jein and a team at Industrial Light & Magic (ALM) built the original six-foot model of the USS Enterprise (NCC-1701-D), the Ferengi Marauder starship and, the Klingon Vor'cha.
BACK TO STAR TREK TOS 1966 THRU 1969
Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.
Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).
Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props.
Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage.
James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James.
In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart.
The jonpaultrek2012™® company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.
INTERNATIONAL ORDER TRANSIT TIMES DEPENDS ENTIRELY ON: (a) THE LOCAL DESTINATION TRANSIT TIMES, AND (b) LOCAL DESTINATION CUSTOMS CLEARANCE TIME. THIS EBAY SELLER IS NOT RESPONSIBLE FOR YOUR LOCAL CARRIER AND LOCAL CUSTOMS OFFICE SLOW PROCESSING. TRACK ALL ORDERS THROUGH EBAY AND INQUIRE ON ALL DELAYS BY CONTACTING EBAY.
SD Studios SDStudios sci-fi-props scifiprops
Shipping Summary:
- Packages are shipped from Monday to Friday.
- The usual time for processing an order is 1 to 3 business days, but may vary depending on the availability of products ordered. This period excludes delivery times, which depend on your geographic location.
- We provide tracking for every order. Tracking will be available once your product is shipped. Each individual product may be shipped from different fulfillment centers across the globe as our product research team spends the time to source quality yet affordable products.
Estimated delivery times:
- Standard Shipping: 3-7 business days
- Expedited Shipping: 2-5 business days
- International Shipping: 10 - 15 business days
Please note that these are estimates, not guarantees. Delivery time depends on a number of variables, and there may be delays such as bad weather affecting air transport, or a package being held for inspection by Customs. ibspot is not liable for any delays in international transportation or customs clearance.
Shipments can be delivered directly to most addresses, except post office boxes. However, in certain remote areas, there may be an additional delivery charge or you may need to pick up your package from the closest service location of ibspot's shipping partner.
Shipping Status:
As soon as your order ships, you'll receive a shipping confirmation email that includes your tracking number.
If you don't receive a shipping confirmation email right away, don't worry! We know the delivery date or date range provided at checkout and we'll be sure to deliver the items within that timeframe.
Order changes:
Please contact our customer support if the order needs to be canceled or modified.
Item not received:
If you've successfully placed an order and haven't received it yet while the tracking status shows it's delivered. you'd wish to contact the carrier to hunt out your Cover as once the item is Covered we have control over it (once it’s by the carrier), but if still persists kindly email us
Damaged Parcel
If your package has been delivered in a PO Box, please note that we are not responsible for any damage that may result (consequences of extreme temperatures, theft, etc.).
If you have any questions regarding shipping or want to know about the status of an order, please contact us or email to support@ibspot.com.
Please Read Our Return & Refund Policy Carefully:
Return:
You may return most items within 30 days of delivery for a full refund.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a tracking number, which shows the items which you already returned to us.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
Items returned to us as a result of our error will receive a full refund,some returns may be subject to a restocking fee of 7% of the total item price, please contact a customer care team member to see if your return is subject. Returns that arrived on time and were as described are subject to a restocking fee.
Items returned to us that were not the result of our error, including items returned to us due to an invalid or incomplete address, will be refunded the original item price less our standard restocking fees.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Shipping Cost
We'll pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). In other cases, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Refund:
- Purchases may be returned within 30 days of the shipping date for a refund.
- Refund will be issued to your original form of payment.
- Refunds for orders purchased with IBSPOT Gift Cards and/or IBSPOT Notes will be issued as a IBSPOT Gift Card and mailed to the original billing address. Gift cards cannot be redeemed for cash unless required by law.
Refund Processing
• Returns to a IBSPOT store will be refunded to the original form of payment or gift card. • Mail-in returns with our prepaid return label will be refunded back to the original form of payment within 3-5 business days after we receive your return. Please allow 5-7 business days for your return to arrive at our Returns Center.
• Note: It may take a few days until your bank posts the refund to your account.
Claims:
Claims related to the product. Be sure to check the details of your purchase carefully before you make the payment, and check the contents of the package(s) promptly upon receipt. If you have a problem with the product, visit our Support Center to find out about return shipping arrangements.
WHICH CIRCUMSTANCES WE OFFER RETURND & REFUND:
WRONG PRODUCT:
If you discover your order is flawed please contact us Mail: support@ibspot.com. With photos of the wrong product we will providing a return shipping label. Once it is tracking we will ship a replacement a product immediately.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Oops!
Sorry, it looks like some products are not available in selected quantity.
