Cadiveu Plastica dos Fios Straightener Brazilian Keratin Wires Treatment 3 x 1L
Cadiveu Plastica dos Fios Straightener Brazilian Keratin Wires Treatment 3 x 1L
Cadiveu Plastica dos Fios Straightener Brazilian Keratin Wires Treatment 3 x 1L
Cadiveu Professional Plastica dos Fios Hair Plastic Surgery Smoothing System...
Cadiveu Plastic Wire Kit Heat Sealing Anti-Frizz 1L
The Cadiveu Thermal Sealing Kit is an intensive treatment that reduces volume, eliminates frizz and provides smooth, controlled yarn for up to 3 months. It deeply nourishes and moisturizes the hair as well as giving incredible shine and strengthening the structure, preventing breakage.
Contains
Cadiveu Plastic Yarn Step 1 Pre-Sealing Shampoo 1000ml: Deep cleans the hair and helps open the cuticle facilitating the penetration of the active principles of treatment.
Cadiveu Plastic Yarn Step 2 Heat Sealing 1000ml: With the other products, it promotes the long lasting natural smooth effect on the hair and leaves the hair shiny and frizz-free.
Cadiveu Plastic Wire Step 3 Sealant Mask 1000ml: Promotes maximum hydration of the wires reducing frizz and accentuating the smooth effect.
Products are not available individually.
Action
Treatment consisting of Arginine, Acai Extract and Acetic Acid (ph acid).
Acai Extract: Rich in nutrients such as Vitamins, Essential Sugars and Emollient Oils. Its antioxidant and protective action promotes a complete regeneration of the hair, efficiently and prolonged hydration.
Amino acids: balance the structure of the wires from aggressions caused by the excessive use of dryers and flat iron. Increases its suppleness and elasticity, leaving hair softer and extremely easy to comb.
Phytonutrients: Nourish and protect hair, helping to regenerate damaged and worn parts.
Acetic Acid Shampoo: Acidic acid may cause irritation and peeling of sensitized leather. For this reason we recommend not to apply to pregnant women, people with sensitive leather and children under 12 years.
Note: Offers about 35 applications. Certified Micro Quality Labs (USA) and Anvisa. The effect is prolonged with the use of Cadiveu Plastic Wire care products.
It should not be applied to pregnant women, people with sensitive scalp and children.
Try CADIVEU PROFESSIONAL PLASTIC WIRE HAIR PLASTIC SURGERY THERMAL SEAL (3 PRODUCTS) and check the results.
Application Council
Material needed: silicone gloves, dryer, board, plastic clips, fine comb, brush and plastic container.
1- Wash your hair with the Pre-Treatment Shampoo, massaging until foamy. Wash twice in case of virgin hair that is very resistant or very dirty. Let it act for 5 minutes and rinse completely. Attention: Do not rub the scalp.
2- Dry the hair in 80% with the dryer and finger aid.
3- Separate the hair into 6 parts (a vertical line separating the hair into two strands - right and left - and 3 horizontal sessions - neck, middle and front from the ears). Secure each session in a bun with a clip.
4- Pour 20 to 40ml of Heat Seal in a container and put on the silicone gloves.
5- Start applying on a strand of the neck with the aid of the brush. Apply two fingers of the root to the base of the wick and pull the product to the ends with the comb. Make sure the product is on all wires.
6- Repeat the procedure with the side lock.
7- With the dryer in the cold jet, dry the two locks 100%. It is important to dry two strands at a time with the cold jet. This prevents smoke formation and prevents the product from evaporating without effect.
8- Repeat the procedure from 5 to 7 on the two central strands of hair one at a time.
9- Finally, repeat the procedure 5 to 7 on the two front strands of hair, drying the strands back. It is important that neither the dryer wind nor the lint with the product come into contact with the face.
10- Time to board! In blonde, damaged or chemical hair the board temperature should not exceed 200 ° C. For normal, virgin or temperature resistant hair it should be at 230 ° C.
11- Divide the hair again into parts using barrettes. Separate a thin, linear strand and plank the length (without the tips) of the strand 10 times (200 ° C board) or 7 times (230 ° C board).
12- Prick the ends (without the length) of the hair up to 4 times (200 ° C board) or 2 times (230 ° C board). This way you avoid the artificial smooth effect on the tips.
13- Repeat this process (steps 11 and 12) for all strands of hair. The straight flat iron with respect to leather makes the strands naturally smooth from the root.
14- After plucking all the strands, rinse the hair well.
15- Apply the Restorative Mask on the wires gently massaging the strands. Let it act for 5 minutes and rinse again.
16- Dry the hair with the dryer.
Note: In case of relaxed or straightened hair, apply the Plastic Thermal Sealing of the wires after the chemical process. In the case of dyeing or toning, apply Plastic Thermal Yarn Sealing two days before or after dyeing to better fix the color pigments to the yarn.
PayPal
FedEx 3 Day Delivery - Fast International Shipping
30 Day Free Returns
| Brand: | Cadiveu Professional |
|---|---|
| Isin: | ISFYANBCP4KL |
This product is not available in the selected country
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Cadiveu Professional Plastica dos Fios Hair Plastic Surgery Smoothing System...
Cadiveu Plastic Wire Kit Heat Sealing Anti-Frizz 1L
The Cadiveu Thermal Sealing Kit is an intensive treatment that reduces volume, eliminates frizz and provides smooth, controlled yarn for up to 3 months. It deeply nourishes and moisturizes the hair as well as giving incredible shine and strengthening the structure, preventing breakage.
Contains
Cadiveu Plastic Yarn Step 1 Pre-Sealing Shampoo 1000ml: Deep cleans the hair and helps open the cuticle facilitating the penetration of the active principles of treatment.
Cadiveu Plastic Yarn Step 2 Heat Sealing 1000ml: With the other products, it promotes the long lasting natural smooth effect on the hair and leaves the hair shiny and frizz-free.
Cadiveu Plastic Wire Step 3 Sealant Mask 1000ml: Promotes maximum hydration of the wires reducing frizz and accentuating the smooth effect.
Products are not available individually.
Action
Treatment consisting of Arginine, Acai Extract and Acetic Acid (ph acid).
Acai Extract: Rich in nutrients such as Vitamins, Essential Sugars and Emollient Oils. Its antioxidant and protective action promotes a complete regeneration of the hair, efficiently and prolonged hydration.
Amino acids: balance the structure of the wires from aggressions caused by the excessive use of dryers and flat iron. Increases its suppleness and elasticity, leaving hair softer and extremely easy to comb.
Phytonutrients: Nourish and protect hair, helping to regenerate damaged and worn parts.
Acetic Acid Shampoo: Acidic acid may cause irritation and peeling of sensitized leather. For this reason we recommend not to apply to pregnant women, people with sensitive leather and children under 12 years.
Note: Offers about 35 applications. Certified Micro Quality Labs (USA) and Anvisa. The effect is prolonged with the use of Cadiveu Plastic Wire care products.
It should not be applied to pregnant women, people with sensitive scalp and children.
Try CADIVEU PROFESSIONAL PLASTIC WIRE HAIR PLASTIC SURGERY THERMAL SEAL (3 PRODUCTS) and check the results.
Application Council
Material needed: silicone gloves, dryer, board, plastic clips, fine comb, brush and plastic container.
1- Wash your hair with the Pre-Treatment Shampoo, massaging until foamy. Wash twice in case of virgin hair that is very resistant or very dirty. Let it act for 5 minutes and rinse completely. Attention: Do not rub the scalp.
2- Dry the hair in 80% with the dryer and finger aid.
3- Separate the hair into 6 parts (a vertical line separating the hair into two strands - right and left - and 3 horizontal sessions - neck, middle and front from the ears). Secure each session in a bun with a clip.
4- Pour 20 to 40ml of Heat Seal in a container and put on the silicone gloves.
5- Start applying on a strand of the neck with the aid of the brush. Apply two fingers of the root to the base of the wick and pull the product to the ends with the comb. Make sure the product is on all wires.
6- Repeat the procedure with the side lock.
7- With the dryer in the cold jet, dry the two locks 100%. It is important to dry two strands at a time with the cold jet. This prevents smoke formation and prevents the product from evaporating without effect.
8- Repeat the procedure from 5 to 7 on the two central strands of hair one at a time.
9- Finally, repeat the procedure 5 to 7 on the two front strands of hair, drying the strands back. It is important that neither the dryer wind nor the lint with the product come into contact with the face.
10- Time to board! In blonde, damaged or chemical hair the board temperature should not exceed 200 ° C. For normal, virgin or temperature resistant hair it should be at 230 ° C.
11- Divide the hair again into parts using barrettes. Separate a thin, linear strand and plank the length (without the tips) of the strand 10 times (200 ° C board) or 7 times (230 ° C board).
12- Prick the ends (without the length) of the hair up to 4 times (200 ° C board) or 2 times (230 ° C board). This way you avoid the artificial smooth effect on the tips.
13- Repeat this process (steps 11 and 12) for all strands of hair. The straight flat iron with respect to leather makes the strands naturally smooth from the root.
14- After plucking all the strands, rinse the hair well.
15- Apply the Restorative Mask on the wires gently massaging the strands. Let it act for 5 minutes and rinse again.
16- Dry the hair with the dryer.
Note: In case of relaxed or straightened hair, apply the Plastic Thermal Sealing of the wires after the chemical process. In the case of dyeing or toning, apply Plastic Thermal Yarn Sealing two days before or after dyeing to better fix the color pigments to the yarn.
PayPal
FedEx 3 Day Delivery - Fast International Shipping
30 Day Free Returns
- Country/Region of Manufacture: Brazil
- Custom Bundle: No
- Modified Item: No
- Brand: Cadiveu Professional
- Department: Adult, Unisex
- Type: Keratin Treatment
- Volume: 33.8 Oz.
- Formulation: Cream
- Hair Type: All Hair Types
- Features: Alcohol-Free, Cruelty-Free/No Animal Testing, Formaldehyde-Free, Ammonia-Free, Contains Vitamins
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.
