Unbranded Xm-18 Incubator Controller 0-99℃ Digital Display Automatic Incubator Controller
Unbranded Xm-18 Incubator Controller 0-99℃ Digital Display Automatic Incubator Controller
Description
This automatic incubator controller adopts the latest microelectronic technology and new components to make the instrument miniaturized, intelligent. It is equipped with an imported digital temperature sensor and a humidity sensor to ensure the measured data is highly accurate. This machine is stable and reliable, labor-saving, and easy to operate. It is suitable for home use, and can also be applied to large, medium and small hatcheries to help them achieve modern digital management.
Key Features
Data-driven: This automatic incubator controller digitally displays temperature, humidity, and rotation frequency. The data on the screen helps you to visualize the incubation situation more easily.
Intelligent: It can fully automatically control the temperature and humidity, egg turning, air cooling and ventilation. This way it can greatly improve your work efficiency.
Safe and Reliable: It has a fully automatic alarm function. You can set the over-temperature value, over-temperature alarm value, control upper limit value, etc. When the value reaches the setting, it will automatically start a related operation or alarm. So it has a high safety factor.
Compact Size: It measures only 16cmx9cmx8cm/6.30''x3.54''x3.15'' and weighs 0.4kg. it is a small instrument and easy to carry.
Free Options: It has two egg flipping methods, that is, automatic and manual egg flipping. You only need to do a simple operation to switch between these two ways freely.
High Availability: It can operate normally at 110V, 60HZ AC voltage, with the ambient relative humidity less than 85% RH and the temperature range between -10°C and 60°C. Therefore, it applies to most situations.
High Accuracy: It is equipped with a temperature sensor and a humidity sensor, which are made of high-precision macromolecule material. So the measured data is highly accurate.
High-quality Service: We also provide you with high-quality pre-sales and after-sales services for free. If you have any problem with using the product, please feel free to contact us and we will try our best to help you.
Details
Red Alert and Egg-Turning Alert: This incubator controller will send out signal alerts about temperature, humidity, lighting and egg turning. Within the normal range, the green display light will be on. Otherwise or when the egg needs to be turned, the alarm or egg turning display light will show red.
Humidity Probe and Temperature Probe: It contains an imported digital temperature sensor and humidity sensor. When the probe is connected to the incubator, it can measure the temperature and humidity with high precision.
Digital Display: It contains seven different signal alerts for high temperature, temperature control, low temperature, left turn of eggs, right turn of eggs, humidity control, and lighting.
Application
It is suitable for home use, and can also be applied to large, medium and small hatcheries to help them achieve modern digital management.
Specification
Model: XM-18
Size: 16cmx9cmx8cm / 6.30''x3.54''x3.15''
Weight: 0.4kg/0.882lbs
Temperature Measuring Range: 0-99℃
Temperature Measurement Accuracy: ±0.1℃
Humidity Measurement Range: 0-99% RH
Humidity Measurement Accuracy: ±3% RH
Number of Signal-output: 7
The Number of Egg-turning: The maximum record is 999 times.
The Cycle of Egg-turning: Adjustment of 0 - 999 minutes
Egg-turning Time: Adjustment from 0 to 999 seconds
Ventilation Cycle: from 0 to 999 minutes
Ventilation Time: from 0 to 999 seconds
Temperature Measurement Line Length: About 200cm/78.74inch
Voltage: AC110V, 60HZ
Relative Humidity: Less than 85%
Ambient Temperature: -10-60℃
Main Color: Black
How to Use
This product comes with bilingual instructional manuals, which give a detailed tutorial on how to use it. If you have any other questions, please feel free to contact us. We will do our best to help you.
Package Included
1 x XM-18 Incubator Controller
1 x Temperature Sensor
1 x Humidity Sensor
1 x Chinese Instructional Manual
1 x English Instructional Manual
Notes
1. When this product leaves the factory, we have made adjustments to the temperature, humidity, egg turning and ventilation settings to meet the required condition for incubation. Technically speaking, there is no need to set the device again. It can be directly used once connected to the power supply. The factory default settings are as followings:
Temperature: 38℃; humidity: 60%RH; egg turning cycle: 90 minutes; egg turning duration: 180 seconds; ventilation cycle: 120 minutes, ventilation duration: 30 seconds; automatic egg turning.
2. If you want to adjust the temperature and humidity, please refer to the given user manual. Please do not change other parameters to prevent operational errors that may affect your use and bring you unnecessary losses.
3. The temperature and humidity sensor is made of high-precision, macromolecular material. Please do not allow the sensor to come into direct contact with water. It must be regularly cleared of surface dust, otherwise, it will affect the accuracy of measurement.
4. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Brand: | Unbranded |
---|---|
Isin: | ISZEZGDRXLJ2 |

IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Description
This automatic incubator controller adopts the latest microelectronic technology and new components to make the instrument miniaturized, intelligent. It is equipped with an imported digital temperature sensor and a humidity sensor to ensure the measured data is highly accurate. This machine is stable and reliable, labor-saving, and easy to operate. It is suitable for home use, and can also be applied to large, medium and small hatcheries to help them achieve modern digital management.
Key Features
Data-driven: This automatic incubator controller digitally displays temperature, humidity, and rotation frequency. The data on the screen helps you to visualize the incubation situation more easily.
Intelligent: It can fully automatically control the temperature and humidity, egg turning, air cooling and ventilation. This way it can greatly improve your work efficiency.
Safe and Reliable: It has a fully automatic alarm function. You can set the over-temperature value, over-temperature alarm value, control upper limit value, etc. When the value reaches the setting, it will automatically start a related operation or alarm. So it has a high safety factor.
Compact Size: It measures only 16cmx9cmx8cm/6.30''x3.54''x3.15'' and weighs 0.4kg. it is a small instrument and easy to carry.
Free Options: It has two egg flipping methods, that is, automatic and manual egg flipping. You only need to do a simple operation to switch between these two ways freely.
High Availability: It can operate normally at 110V, 60HZ AC voltage, with the ambient relative humidity less than 85% RH and the temperature range between -10°C and 60°C. Therefore, it applies to most situations.
High Accuracy: It is equipped with a temperature sensor and a humidity sensor, which are made of high-precision macromolecule material. So the measured data is highly accurate.
High-quality Service: We also provide you with high-quality pre-sales and after-sales services for free. If you have any problem with using the product, please feel free to contact us and we will try our best to help you.
Details
Red Alert and Egg-Turning Alert: This incubator controller will send out signal alerts about temperature, humidity, lighting and egg turning. Within the normal range, the green display light will be on. Otherwise or when the egg needs to be turned, the alarm or egg turning display light will show red.
Humidity Probe and Temperature Probe: It contains an imported digital temperature sensor and humidity sensor. When the probe is connected to the incubator, it can measure the temperature and humidity with high precision.
Digital Display: It contains seven different signal alerts for high temperature, temperature control, low temperature, left turn of eggs, right turn of eggs, humidity control, and lighting.
Application
It is suitable for home use, and can also be applied to large, medium and small hatcheries to help them achieve modern digital management.
Specification
Model: XM-18
Size: 16cmx9cmx8cm / 6.30''x3.54''x3.15''
Weight: 0.4kg/0.882lbs
Temperature Measuring Range: 0-99℃
Temperature Measurement Accuracy: ±0.1℃
Humidity Measurement Range: 0-99% RH
Humidity Measurement Accuracy: ±3% RH
Number of Signal-output: 7
The Number of Egg-turning: The maximum record is 999 times.
The Cycle of Egg-turning: Adjustment of 0 - 999 minutes
Egg-turning Time: Adjustment from 0 to 999 seconds
Ventilation Cycle: from 0 to 999 minutes
Ventilation Time: from 0 to 999 seconds
Temperature Measurement Line Length: About 200cm/78.74inch
Voltage: AC110V, 60HZ
Relative Humidity: Less than 85%
Ambient Temperature: -10-60℃
Main Color: Black
How to Use
This product comes with bilingual instructional manuals, which give a detailed tutorial on how to use it. If you have any other questions, please feel free to contact us. We will do our best to help you.
Package Included
1 x XM-18 Incubator Controller
1 x Temperature Sensor
1 x Humidity Sensor
1 x Chinese Instructional Manual
1 x English Instructional Manual
Notes
1. When this product leaves the factory, we have made adjustments to the temperature, humidity, egg turning and ventilation settings to meet the required condition for incubation. Technically speaking, there is no need to set the device again. It can be directly used once connected to the power supply. The factory default settings are as followings:
Temperature: 38℃; humidity: 60%RH; egg turning cycle: 90 minutes; egg turning duration: 180 seconds; ventilation cycle: 120 minutes, ventilation duration: 30 seconds; automatic egg turning.
2. If you want to adjust the temperature and humidity, please refer to the given user manual. Please do not change other parameters to prevent operational errors that may affect your use and bring you unnecessary losses.
3. The temperature and humidity sensor is made of high-precision, macromolecular material. Please do not allow the sensor to come into direct contact with water. It must be regularly cleared of surface dust, otherwise, it will affect the accuracy of measurement.
4. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!


- FEATURE: FAST-SHIPPING
- Features: High Quality Packaging
- Feaures: Convenient UseUnique AppearanceReliable Quality
- Highlights: Good Quality Guarantee
- Tip: If you have any question , please contact us
- Fetures: Good Quality Guarantee
- * Feature *: Great Durability,Exquisite Appearance,High-quality
- Feature *: Convenient UseUnique Appearancereliable quality
- Feature 1: Stable characteristic, high reliability
- Note: shipping notice:Can not ship to Puerto Rico,Alaska/Hawaii
- Brand: Unbranded
- MPN: Does Not Apply
- Model: XM-18
- Size: 16cmx9cmx8cm/6.30''x3.54''x3.15''
- Temperature Measuring Range: 0-99.9℃
- Temperature Measurement Accuracy: ± 0.1℃
- Humidity Measurement Range: 0-99% RH
- Humidity Accuracy: ± 3% RH
- Number of egg-turning: the maximum record is 999 times
- Working voltage: AC 110V,60HZ
- Relative humidity: less than 85%
- Ambient temperature: -10℃~60℃
- Type: Digital Incubators
- UPC: Does not apply
Shipping Summary:
- Packages are shipped from Monday to Friday.
- The usual time for processing an order is 1 to 3 business days, but may vary depending on the availability of products ordered. This period excludes delivery times, which depend on your geographic location.
- We provide tracking for every order. Tracking will be available once your product is shipped. Each individual product may be shipped from different fulfillment centers across the globe as our product research team spends the time to source quality yet affordable products.
Estimated delivery times:
- Standard Shipping: 3-7 business days
- Expedited Shipping: 2-5 business days
- International Shipping: 10 - 15 business days
Please note that these are estimates, not guarantees. Delivery time depends on a number of variables, and there may be delays such as bad weather affecting air transport, or a package being held for inspection by Customs. ibspot is not liable for any delays in international transportation or customs clearance.
Shipments can be delivered directly to most addresses, except post office boxes. However, in certain remote areas, there may be an additional delivery charge or you may need to pick up your package from the closest service location of ibspot's shipping partner.
Shipping Status:
As soon as your order ships, you'll receive a shipping confirmation email that includes your tracking number.
If you don't receive a shipping confirmation email right away, don't worry! We know the delivery date or date range provided at checkout and we'll be sure to deliver the items within that timeframe.
Order changes:
Please contact our customer support if the order needs to be canceled or modified.
Item not received:
If you've successfully placed an order and haven't received it yet while the tracking status shows it's delivered. you'd wish to contact the carrier to hunt the packages. Once a package is marked “Delivered” by the carrier, we are no longer responsible for lost or stolen items. Please ensure you provide a secure delivery address.
Damaged Parcel
If your package has been delivered in a PO Box, please note that we are not responsible for any damage that may result (consequences of extreme temperatures, theft, etc.).
If you have any questions regarding shipping or want to know about the status of an order, please contact us or email to support@ibspot.com.
Please Read Our Return & Refund Policy Carefully:
Return:
You may return most items within 30 days of delivery for a full refund.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a tracking number, which shows the items which you already returned to us.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
Items returned to us as a result of our error will receive a full refund,some returns may be subject to a restocking fee of 7% of the total item price, please contact a customer care team member to see if your return is subject. Returns that arrived on time and were as described are subject to a restocking fee.
Items returned to us that were not the result of our error, including items returned to us due to an invalid or incomplete address, will be refunded the original item price less our standard restocking fees.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Shipping Cost
We'll pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). In other cases, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Refund:
- Purchases may be returned within 30 days of the shipping date for a refund.
- Refund will be issued to your original form of payment.
- Refunds for orders purchased with IBSPOT Gift Cards and/or IBSPOT Notes will be issued as a IBSPOT Gift Card and mailed to the original billing address. Gift cards cannot be redeemed for cash unless required by law.
Refund Processing
• Returns to a IBSPOT store will be refunded to the original form of payment or gift card. • Mail-in returns with our prepaid return label will be refunded back to the original form of payment within 3-5 business days after we receive your return. Please allow 5-7 business days for your return to arrive at our Returns Center.
• Note: It may take a few days until your bank posts the refund to your account.
Claims:
Claims related to the product. Be sure to check the details of your purchase carefully before you make the payment, and check the contents of the package(s) promptly upon receipt. If you have a problem with the product, visit our Support Center to find out about return shipping arrangements.
WHICH CIRCUMSTANCES WE OFFER RETURND & REFUND:
WRONG PRODUCT:
If you discover your order is flawed please contact us Mail: support@ibspot.com. With photos of the wrong product we will providing a return shipping label. Once it is tracking we will ship a replacement a product immediately.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Oops!
Sorry, it looks like some products are not available in selected quantity.